Jump to content

Log in or register to remove this advert

Recommended Posts

Log in or register to remove this advert

Posted (edited)
9 minutes ago, Steve Bullman said:

Technically the bottom one, but I would do the top one in most cases

as a part timer on the subject, I thought the rule of thumb was not to exaggerate the wound?..  but have seen american's use your preferred method on utube. 

 

apart from the aesthetics any reason why one is better than the other?..  only askin because I pruned an apple tree a bit yesterday and I just chopped off anything that I thought made it look thinner..   

Edited by Vespasian
  • Like 1
Posted

Exactly what you say, the cut should be made at the point that creates the smallest surface wound.

 

A few mm's isn't going to hurt for the sake of aesthetics IMO, and in some cases will leave a cleaner wound in the long term when it callouses over.  You only have to look at the old style flush cuts for an example of that.

Posted
2 minutes ago, AA Teccie (Paul) said:

According to the 'latest' ISA publication ('The CODIT Principle') probably the first one as the second one is likely to form a "nourishment blind spot' (see attached.)

 

TTFN..

Paul

CODIT5.pdf

See, they've changed their mind again, thats why I just usually do what I want to do :D

  • Like 1
Posted
17 minutes ago, Darrin Turnbull said:

First picture/cut i use for small diameter branches the second for bigger stuff.

 

Its all about choosing the right cut at the right time.  Theres no one size fits all

  • Like 2
Posted

Frankly , over the many years - I has found it species specific, cherry spp can occlude better with the cut even a bit closer to the collar - but I always shave the cut to the top example , K

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.