560XP hard to pull

[MattyF]

Had you put the chain on the drive sprocket right ? Most likely cause.

[AllyH]

Had you put the chain on the drive sprocket right ? Most likely cause.

 

 

Well I presume so . . . Put the standard bar on and all ok. Would pull ok with the decomp in though. Strange eh

 

 

Sent from my iPhone using Arbtalk

[Stoke Wood Project]

It's quite easy on those to put bar and chain on, and the chain isn't in the sprocket properly.

Reassemble, invert saw, check carefully that chain is in sprocket.

 

Sent from my E5823 using Arbtalk mobile app

[Stoke Wood Project]

Had you put the chain on the drive sprocket right ? Most likely cause.

Yup, sounding more like this!

 

 

Sent from my E5823 using Arbtalk mobile app

[Joe Newton]

Or the Sugi bar is a touch longer, and the bar is pressed up tight to the sprocket.

 

Sent from my SM-G930F using Arbtalk mobile app

[Stubby]

Or the Sugi bar is a touch longer, and the bar is pressed up tight to the sprocket.

 

Sent from my SM-G930F using Arbtalk mobile app

 

Wont be that as I run a Sugi on mine and its not a problem even with a larger dia 8 pin .

[AllyH]

Wont be that as I run a Sugi on mine and its not a problem even with a larger dia 8 pin .

 

 

I'm sure. It was maybe a simple case of the chain wasn't on right?? Who knows. Seems ok now anyway. (Touch wood) lol

 

 

Sent from my iPhone using Arbtalk

[Stubby]

I'm sure. It was maybe a simple case of the chain wasn't on right?? Who knows. Seems ok now anyway. (Touch wood) lol

 

 

Sent from my iPhone using Arbtalk

 

Yea you can get it jammed down between the powermate and the crank case wall .