Rough cost of replacing fly wheel bearings

[Leeticehurst]

Have bought a full overhaul kit for the flywheel bearings as they have given up on me yesterday.

Have spent the last 2 hours trying to remove the first bearings and bearing holder with has resulted in lots of head rubbing and cursing! Which hasn't helped at all.

Have done some reasearch and think this may be a job for a man with a bigger pry bar and bearing puller set.

 

Can any one recommend any one near Gatwick area and any rough idea of labour costs for this??

[Johny Walker]

Have bought a full overhaul kit for the flywheel bearings as they have given up on me yesterday.

Have spent the last 2 hours trying to remove the first bearings and bearing holder with has resulted in lots of head rubbing and cursing! Which hasn't helped at all.

Have done some reasearch and think this may be a job for a man with a bigger pry bar and bearing puller set.

 

Can any one recommend any one near Gatwick area and any rough idea of labour costs for this??

 

 

 

what chipper

[treequip]

what chipper

 

Its a TW150

 

See other posts

[Johny Walker]

Its a TW150

 

See other posts

 

not on here there aint

[Leeticehurst]

Yeah tw150

[Leeticehurst]

Posted on another thread but realised it was quite old

[Dave177]

Did you get this sorted? If not drop me a message, might be able to sort you out.

[dig-dug-dan]

Did you get this sorted? If not drop me a message, might be able to sort you out.

 

same here

[twistedhicap]

Give Paul Lincoln a ring on 07966 247210 tell him GT gave you his number

[Leeticehurst]

Thanks for the offers guys will keep you in mind for next time. Ran it up to a guy about a mile up the road from me recommended by another tree sugeon in the end. They had it stripped the next day. Have taken them all the parts. Will update on their work when I get it back. Looked good tho. Had it in pieces and all cleaned up and ready for new bearings shafts belts anvils and blades and brake shoes!!! Gulp!!!

Should be good as new when she's back!