Jump to content

Log in or register to remove this advert

Recommended Posts

Log in or register to remove this advert

  • Replies 37
  • Created
  • Last Reply

Top Posters In This Topic

Posted

We now have full skip .404 .063 semi chisel 27AX Oregon Full Skip Semi Chisel .404 .063 - Chainsawbars

 

Full skip chisel 3/8 .063 75JGX Oregon Full Skip Chisel Chain 3/8 .063 - Chainsawbars

 

Full skip chisel 3/8 .058 73JGX Oregon Full Skip Chisel Chain 3/8 .058 - Chainsawbars

 

 

Be careful of modifying existing chains with a grinder - it can weaken the chain on that cutter. I snapped a couple in the early days doing this...

 

:blushing:

Posted
Rob those 3/8 058 chains fly, that 16" I got from you is an animal on my 372.

 

Are you able to offer any advice on the 560 3/8 conversion??

 

I think you will need the clutch side cover from a 562 to make room for the 3/8 drive . You will find though that if you run outer dawgs on a 560 they wont fit the 562 clutch cove as the mounting holes are further apart .

Posted
I think you will need the clutch side cover from a 562 to make room for the 3/8 drive . You will find though that if you run outer dawgs on a 560 they wont fit the 562 clutch cove as the mounting holes are further apart .

 

 

Seen a bunch of people running the 3/8 and it seems just a sprocket and bar/chain is all that's needed.

 

If there's a way to get a 562 case and dawwwwwgs that would be awesome.

This saw doesn't get to much use so want to make it a monster with full wrap and skip chain.

Posted

Hi

 

As I understand it you grind off every third cutter, so you end up with two cutters (L&R or R&L) then a gap and so on.

 

 

N

Posted
Hi

 

As I understand it you grind off every third cutter, so you end up with two cutters (L&R or R&L) then a gap and so on.

 

 

N

 

 

That should give a semi skip if I'm right? Still be faster than full comp chain.

 

Thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.