timber crabe hydraulics

[briquette_seller]

The feed hose is still popping out.

Tried everything suggested.

 

Anybody?

[Jase hutch]

Did you change both the male and female quick release couplings..?

[briquette_seller]

Did you change both the male and female quick release couplings..?

 

Yes did that, all new, all matching manufacturers

[skyhuck]

Yes did that, all new, all matching manufacturers

 

That makes no sense, the pipe should burst before the coupling came apart

[treequip]

If the flow rate from the tractor is too high, could this be the problem?

 

Absolutely

[openspaceman]

She's still popping out.

 

Returning to the tank now and not through the spool.

Fitted a new male quick release coupling, incase it was worn.

 

If the flow rate from the tractor is too high, could this be the problem?

 

Absolutely

 

It's not something I have experienced, even with a quick release supply to a FAE mulcher.

 

 

Does it get hot at all?

[treequip]

It's not something I have experienced, even with a quick release supply to a FAE mulcher.

 

I have, someone robbed the PTO pump off my trailer the only spare I had was running a side arm flail and massively over size. It was practically unworkable but it served to get the legs up and crane stowed.

 

In hydraulics, too much is not always a good thing

[briquette_seller]

It's not something I have experienced, even with a quick release supply to a FAE mulcher.

 

 

Does it get hot at all?

 

Not overly

[briquette_seller]

I have, someone robbed the PTO pump off my trailer the only spare I had was running a side arm flail and massively over size. It was practically unworkable but it served to get the legs up and crane stowed.

 

In hydraulics, too much is not always a good thing

 

One spool is adjustable, I will need to try it screwed right down.

[treequip]

What's needed is more info, is this a new issue with existing kit that's previously been OK, or a change of kit issue