Jump to content

Log in or register to remove this advert

briquette_seller

Veteran Member
 View Profile  See their activity

  • Posts

    1,185

  • Joined

  • Last visited

 Content Type 

Everything posted by briquette_seller

  1. briquette_seller

    .

    briquette_seller posted a topic in General chat

    .
  2. briquette_seller
    One man went to mow, went to mow a meadow........
  3. briquette_seller
    .
  4. briquette_seller
    Timberwolf do a shredder, tow, tracks or pto.
  5. briquette_seller
    Rust in the back of the seals, tightens the grip on the ram.
  6. briquette_seller
    No, never had time, it's been one f up or break down after another. I will get round to it, was going to get a new radiator made for it.
  7. briquette_seller
    Well, it turned out the AC motor was actually a DC motor, and it didn't take very kindly being wired straight into the generator............ I had another motor on an old defunct conveyor, so managed to swap it over without to much trouble. Lesson learnt the hard way ?
  8. briquette_seller
    Thanks for sharing
  9. briquette_seller
    Thanks for all your replies. All I could find on Google was cheap Chinese tat.
  10. briquette_seller
    I've bought a conveyor with a 3 phase 16 amp ac motor on it. All I have is a cable sticking out of the motor, no switch or control gear. Where do I find, or what do I need, to make the belt variable speed? Any help much appreciated
  11. briquette_seller
    Netted by hand?
  12. briquette_seller
    Did you buy one Tom?
  13. briquette_seller
    ...
  14. briquette_seller
    https://www.amazon.co.uk/P1PE-2-Stroke-Chainsaw-20-inch-P6220C/dp/B07BVBXNC3/ref=mp_s_a_1_1?ie=UTF8&qid=1541711304&sr=8-1-spons&pi=AC_SX236_SY340_FMwebp_QL65&keywords=hyundai+chainsaw&psc=1 That's a lot of saw for £100
  15. briquette_seller
    Palax do a tipper for bags, may work for ibcs?
  16. briquette_seller
    Seals only. Everything else seemed to be ok. Phone Clark's at Dumfries, they're a helpful bunch.
  17. briquette_seller
    Seal kits are quite expensive, but it's an easy enough job.
  18. briquette_seller
    Jim Wilmer and Sons were taking on guys to train
  19. briquette_seller
    Nope, not had time She's parked up in the corner of the shed
  20. briquette_seller
    Looks good. How comes the log deck is on an axle? Do you go out contracting?
  21. briquette_seller
    New thermostat fitted, made no difference. Pressure test was fine, so taking the radiator off to get a new core
  22. briquette_seller
    Larch log, Looks dry, sounds dry, but...... Moisture reading around the outside of the log is zero. Split the log in half and taken moisture reading throughout, excluding the very centre, generally at 10% moisture, highest reading was 18%, this was taken less than an inch off centre. Very centre of the log reads 28%. Thoughts/opinions?
  23. briquette_seller
    No not yet. I don't have the kit to do the pressure test myself, and iam waiting to hear back from a local ag engineer.
  24. briquette_seller
    No pitting or fretting. Head was not skimmed nor pressure tested. I'll try a pressure test on Monday
  25. briquette_seller
    No radweld, but could have had a mix of antifreeze. I'll clean again, but the first time was pretty clean, not gunky at all.........

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept