New Husqvarna s wont start

[eddystihl]

Will try tomorrow morning thx

 

 

Sent from my iPad using Arbtalk

[SteveA]

Fulled up , great advice a super forum , we dont have such a forum in the netherlands

So it is flooding very easy , dont pull to long with the chooke on is your. Advice

 

 

Sent from my iPad using Arbtalk

 

When I was trying to start mine from new it was definitely flooding because the spark plug was sopping wet. So yes it can be easy to flood an autotune husky saw. I was pulling it about 30 times in the choke position!.... drove me mad!

 

The fast idle position is your friend.

cheers, steve

[eddystihl]

Thx steve

 

 

Sent from my iPad using Arbtalk

[pike]

Don't use decomp button,We have had a few that were terrible starters ,start as normal just don't use decomp and 2nd or 3rd pull they are away

[stihlmadasever]

Got a husky 135 recently as an"abuse" saw,its been difficult to start from day one.

You learn to adapt to there little foibles...or just put it down before you lob it off a wall..

[peatff]

Got a husky 135 recently as an"abuse" saw,its been difficult to start from day one.

You learn to adapt to there little foibles...or just put it down before you lob it off a wall..

 

Open the L screw up a bit and speed the tickover till it moves the chain then back it off till it stops moving. Mine was set weak and you had to fast idle it every time but it's good now.

[eddystihl]

There are working good , tomorrow i will go into the woods .

 

 

Sent from my iPad using Arbtalk

[Mick Dempsey]

Nice pics Eddy.

There is a horse logging sub forum here Horse Logging - Arbtalk.co.uk | Discussion Forum for Arborists

 

Don't know if you knew.

[eddystihl]

Did not know mike , thanks

 

 

Sent from my iPad using Arbtalk

[eddystihl]

Must make a new account to login ?

 

 

Sent from my iPad using Arbtalk