Josh Purton
-
Posts
34 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Calendar
Freelancers directory
Everything posted by Josh Purton
-
Tom Sawyer forester sawmill Have everything to make it mobile again and happy to do so, currently setup low on concrete for ease in the yard. Must be viewed, in good condition all round, swaged and stellite blades included. 4” Blades, some bit of kit! Fully refurbished in 2022, every bearing including the carriage base, Crank seal done, full engine service, reserviced Nov 23, belts etc. Wheel bearings all done fully painted on the back of the wheels as well. Epoxy paint to the saw guards. Located in Newbury, Berkshire Looking for around £26k - open to offers IMG_0867.mov IMG_0787.mov
-
Looking to avoid buying a 21ft lorry body and running a 6m kiln myself (currently have 14ft) as would rarely require it, but have some 6m cedar planks I’d like kiln dried in March 23. Happy to travel and obviously pay but does anyone know someone with a kiln capable of taking a 6m plank please? *note due to the internal dimensions these planks will not fit inside a 20’ reefer container and the customers requirements are for a kiln dried 6m tabletop
-
Wondering if many others have adapted there otherwise very manual mills to be more automated… I’ve adapted the cut width significantly but my mill is basically a woodland mills Totally happy with manually pushing the mill through the log means can return at a good speed and ease back for large knots etc, but what I’d like to add is electric raise and lower of the sawhead with some kind of setworks for board thickness etc. Any photos of what you’ve done / where to source these parts or better still if anyone knows someone that will do this willing to travel to the Berkshire area… Much Appreciated Josh
-
Wagner Orion
-
Typo - 14” space for 14” ‘logs’! I fill up a bulk bag and keep it in the polytunnel until it sells so it can be any degree of moisture tbh and all species of wood, hence fire pit use. A bulk bag I just ask £50 to clear it, I was filling the bonfire or giving to a local tree surgeon for chip before. Logs go in wooden crates and are stored in the poly tunnel til sub 20% moisture.
-
I’m wondering why not have ‘pegs’ for the toe board allowing a far more secure attachment and you’re not going to cut them up when running a saw down? I’ve done similar at 14”spaces so all I have to do is run the saw down the uprights and off falls 14”cuts. I sell these as fire pit logs to avoid having to split down
-
Recent winds have really got me thinking I need to do better with sawdust, currently my Woodland Mills just throws it out against some boards and occasionally il scrape it up with the digger. other than the obvious hang a bucket over the sawdust outlet which then needs emptying every other cut, what have other people done to this mill or similar to manage the dust? Photos would be great! I should add that my mill is completely static, mounted on RSJ’s since I’ve converted it to a 1,1m cut. Not a mobile mill and won’t leave the yard so a more permanent dust collector, preferably petrol or can use a generator if required is what I’m looking to do i think Thanks
-
Evening, I have the same unit, recently purchased second hand. They didn’t have any of the paperwork to go with it, don’t suppose you’d be able to snap a few photos of your paperwork and email them across to me please? My email is [email protected]
-
345kg! Unless that’s already taken then 346 😂
-
If that’s honestly all you value it at then I won’t bother with the hassle of selling, il just take it down and store away as a spare. But I think considering it’s as new with an unused blade sharpener you’re probably just trying it on at that price
-
Only one I have in my phone but will be back at the yard this week so can get more
-
Hi All, I have a nearly new Norwood mn26 that I’m looking to sell. It has less than 10 hours run time since nee a few years ago and I wonder if any of you could advise on its worth please as I want to avoid eBay if possible. Has 5 Bahco Bi-metal blades with it and a brand new unused sharpener. It’s the basic package so only one log clamp and no extra track length. Is fully built and running well so ready to go. I have a Woodland Mills that I’ve cut in half and made into a wide cut bandsaw now I’m looking to buy a new mobile 130max bandsaw leaving the Norwood surplus to requirements Message me if you’re interested but if someone can advise price I’d be most grateful Josh
-
Fairly easy modification - introducing the new Woodland Mills HM148, 48” log with a max cut width of 42” just few little bits to do like paint everything up, add the log clamps
- 72 replies
-
- 10
-
-
Because retrofitting a small, light electric motor onto the sawmill and getting everything lined up will be a lot easier than trying to do the same with a lumpy 25+hp engine btw Les it’s basically because everything had got rather tired on that woodland mills I bought from you, so I’ve cut it in half and made the cut width wider by 18” 😂 just an experiment really as the mill wasn’t worth a lot now anyway and will probably buy a mobile version of something too and keep this at the yard
-
Thanks for the reply, I’m in a similar boat where I have a 14hp Kohler already setup so going to run that til it dies or struggles too much that I need to change. The plan is to then go 18kw electric motor powered by a diesel generator.
-
Sorry to jump in on a thread but I’m in the process of building a fairly wide cut sawmill myself, all be it static as I have the ability to get the logs back to my yard. Can I ask what engine you’re currently running and how you find it fares with the bigger logs considering your saws width capability…
-
Douglas fir for sure and you’ll find it particularly hard on blades when freshly felled, leave it sat for a year and it’s fine. Great timber actually, have found many customers prefer it to Larch. Also, turn water / whatever lube you’re using up to the max flow
-
Sorry to bring up an old thread but wanting to change the bearings on the band roller, having just ordered belts but not bearings direct from WM to save the aggro of another order, does anybody know the sizes off hand so I can get some off fleabay. thanks
-
Lovely Stem of Burr oak today
-
Just some small oak slabs from the weekend - 69” at widest point. Decided not to bother with the second power head (often get issues with chain tension when running both) but I prefer it to a helper handle for balance and the fact it’ll still oil
-
IMO The only saw for milling is an 880 and small bars just stick with Sugihara, can’t go wrong. Buy from Rob D at ChainsawBars as service always great
-
Yes I do - else the power of the saw shifts it, unseen in the image is small right angle brackets that are lightly screwed into the top of the slab. Only goes into the wood a couple mm so is never seen after flattening / sanding
-
Can’t help but think you all make it extremely hard for yourselves either without a winch or with the winch but in gnarly logs. For everything I chainsaw mill I now setup a Very basic frame on the top of log even after the first cut. Ensure this hangs over the side of the log just enough on the cutting saw (I’m generally double power head setup) side. Full throttle all the way, no gnarly bumps and a nice gentle wind through every-time on the winch. The only boring part about chainsaw milling should be moving the beastly slabs you’ve just milled and resharpening regaularly
-
True but the buyer could, and bought the whole tree worth so is a lot easier for me to just slab it.
-
Here’s some of over 6’ at widest point I done a few weeks back
