shavey

19 minutes ago, DCS6800i said:

What's your warranty like  @shavey

Bloody awful , cut and run every time ??

Dolmar PS-7310 ported

1 hour ago, Spruce Pirate said:

You lose a bit of the bar length with these - but they look mean. 

 

They are pretty mean if you catch the troosers with them too! 

Yes your right Wallace a few years back I ripped the carpet in the back of my car pulling out this devil below by the bar cover 

Below is a parts list for the ps-7310 and ps-7910

http://download.dolmar.com/dipls/31391.pdf

here are the west coast felling spikes

Dolmar PS-7310 , 7910 ,  Makita ea7300 , 7900 felling spikes 

inner and outer @Jamie Jones

Ok thanks that’ll be £10.19+vat  for the pulley  and postage £2.99+vat

Iam doing a Dolmar order on Monday

2 hours ago, elfinwood saws said:

Hi Pulled one out of a 114 parts saw. Perfect fit on the 120 super.

Stuck now for a recoil pulley for a 7901 Makita, looked at buying one from Germany and the postage is 19 euros and the pulley is 12 euros. so that,s not going to happen. Who in the uk will stock one and post it?

 

I’ve put a parts drawing below let me know what number you need and I will do a price for you

I got some spikes here not sure if there pairs or just outers

Dolmar PS-6100 ready for new owner on Monday 

Dolmar PS-9010 still seems quite popular they still come with the large Dolmar mounts which I adapt to fit the Husqvarna mount

but Rob at chainsaw bars has kindly been stocking the sugihara 28” and 36” solid Pro

bars to fit these large mounts so it’s made things a lot simpler  

On 05/08/2018 at 11:00, elfinwood saws said:

Hi are brakebands for a Dolmar 120 super still available.

                                                            cheers Mark.

 

Hello Mark there not available anymore I try too pick them up if I see them come up 

got customers waiting for them

Good purchase looks good  now just use it like you stole it

and put the best 2-stroke oil through her

On 13/10/2018 at 07:34, Spruce Pirate said:

I got a Dolmar 7910 from Shavey on here a couple of years back.  Changed a few bits as they've broken, but no worse than any other saw that I've run.  Still going strong and still really like the saw.  Video of it here running a 28" bar.

 

https://www.youtube.com/watch?v=bC5gpOgCd0U

Just checked Wallace and you had the Saw feb2015

a week before that Tom up near you had one as well

This my ps-7310 not standard at all 28” bar square ground chain 

woods ported it’s a animal 

On 05/10/2018 at 11:13, littlelionlee88 said:

Load of new old stock of various Dolmar/makita spares.

What ya got in the boxes brief description or PM whichever is easiest 

Yes that’s a good Saw  cheap at the moment you’ll be getting plenty 

of questions about that one @littlelionlee88

iam after same parts as you @DCS6800i

Thanks everyone 

as you know @littlelionlee88 its quite a rare Saw only made for 1yr

it would be a collectors piece and only do what you’ve been doing 

a great sounding Saw a little ripper I had one but due to lack of spares available I sold mine to a collector in Austria a few years back 

I would be quite happy too purchase it from you or work out a sale

on your behalf If you wanted some help a PM with some information and history would be a start

Has the saw gone back yet Bill 

just out of interest did the Saw go back too Milton Keynes 

or to a makita service agent and the piece they pop riveted on

the front was it metal or plastic 

47 minutes ago, woodwizzard said:

Shame, the 365 isn't a patch on the 7900. I won't be bothering sending mine off and I will deal with any issue if and when it happens.

If and when you need the change over parts I will have them soon  

give me a shout and I will be interested too see what brake flag they send over 

2 hours ago, billpierce said:

Hi Andrew, it's all boxed up now for collection I'm afraid. It was extremely well wrapped.

The slip of paper I with it indicates they have changed the brake spring mech etc a "drilled" handle. When I spoke to their technical dept they said they are fitting these plates to reinforce a week handle. I don't think the plate/rivets has caused the handle to snap but that it's increased rigidity has just meant the whole handle won't flex and so the part above the plate just snaps.

Quite annoying really as it seemed fine before. Have you sold many handles Andrew? Suspect not. They seemed fine.

They want it back to look as are pretty concerned about the breakage occurring so soon. At least that I suppose

Hello Bill I have only sold one complete handle and the actual saw handle after a accident in the forest with one 7910 

ive  sold a few brake bands over the years and a few springs 

but never a brake flag through everyday use

they should be concerned as you’ve not even used it 

also I noticed your spring is lost a bit of tension the retaining cup just needs a bit rounding of the end 

15 hours ago, billpierce said:

I was overwhelmed with joy to return from holiday to find my 7900 returned to me. Thankfully it hadn't been nicked despite having just been left out by the courier. Eagerly I opened it up to discover what the important safety mod was....

Hello Bill 

that is bad cant beleive they would do this , surely drilling a safety handle isn’t a good idea , if you drilled a safety hard hat HSE wouldn’t allow this 

can you send me some very very good detailed photos so I can chase it up I wouldn’t dare send a safety handle back too anyone 

in this state

obviously they’ve drilled it to put this sticker on the pop rivet has put pressure on the plastic then it’s had a bump via courier delivery 

thankfully breaking it before you used it 

it it will be interesting too see the handles that come from Dolmar 

I’ve had notification that the chainbrake parts are in , my order of the new mechanism and band will be dispatched today

will be interesting to see what they’ve done

4 hours ago, Stere said:

Iv'e swaped panels round  on mine to make  multi colour  saws.

 

Like a car with a different colour bonnet.

They look ok mixed and matched 

2 hours ago, billpierce said:

Just spoke to Makita, they say they have all the parts in now and saw will be back by next week

Great news