WoodED
-
Posts
3,176 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Freelancers directory
Everything posted by WoodED
-
Revs not picking up properly?
-
My toy,
-
Thank you for the help guys
-
Thank you, what does an sva test consist of? Is it a bit of a pain or not to bad,
-
Hi all, I recently bought a g reg Landy 110 tipper that needs a new chassis, been looking on the Richard chassis website and was wondering weather I could replace with a 130 chassis and what I would need to do to make it legit, Anyone else done something similar?
-
Massively agree with you Matty
-
Isn't it the exact same saw but red and looks slightly different?
-
I have been dumper driving this weekend helping to install permanent roads through the great Dorset steam fair show ground.
-
Remember to scream the 550 out of the box.
-
Wait untill he does
-
my 576xp. Had the full wrap shipped from the USA
-
nice tight fit with the mewp today
-
There is now a new saw strop loop for it, with extended pins to stop it poping out
-
Yh we had 2 of the 261's needing cranks, we put them on the shelf along with 3 x 362s and replaced with A fleet of 560xp's. Only issues we had at first was brake bands and clutch springs, which were re designed. Not bad out of 9 saws.
-
261 is too bulky and they stihl havnt sorted the needle bearing issue after how many years.
-
You have either melted the needle bearing or done a clutch spring, common problem, bearing needs weekly greasing
-
. Or
-
I have a 346xp to but I tend to always pick up the 560xp.
-
We had a fleet of 560's were I used to work. And my one was hammered in thinning works for 2 years, few tinkering problems, mainly clutch springs and brake bands but they have since sorted it out. I have since bought my own 560xp.
-
Thanks for that, I have the silver side 346xp. The oil feed and delivery pipe is in 2 peices on this model? Is this what you meen, it was fine for around 3-4 years then would leave a puddle of oil on my work bench over a few days. Doesn't get used much now as I have a 560xp but would like to get it right, I will picture the pipe I have?
-
Jensen are reliable solid machines, can't go wrong with a a540.
-
My 346 with an oil leek, I think it was coming from the where the delivery pipe joins the oil pump, I out a little bit of non hardening gasket around the pump, hopfully will do the trick
-
The forst st 8 is a stonking machine. Very hungry Firm I used to work for have two tr8's . Found this on YouTube
-
-
Is that an rb44 I see?
