GLOBALOFFROAD

A: The shaft will bend before the rotor distorts B: Sounds as if the no stress has been by-passed, a common Timberwolf issue C: 190 Timberwolfs need sharp anvils to work correctly As a Timberwolf specialist and ex dealer we have seen most disasters through our workshop, and we have never seen a £6k bill. If you want some honest independant advice feel free to ring me during work hours. Andy Tel 0121 4367272

Get the best quality bearings you can get, and you need 2 off 6205 2rs c3 for the nose and 1 off 6208 2rs c3 for the rear

Or give me a ring on 0121 7068617 and i'll talk you through the job, there are a few tricks we've learn't over the years. Andy.

If you would like to ring me on 0121 7068617 during work hours, i will be more than happy to go through all the checks you need to do. Andy Gould Global Sales arboriculture and groundcare equipment

Hi everybody have a look at the link above, this is the Tim Dilworth who is selling the trailer and LR90. I know him and can vouch for him, he's also married to Rachel Simmonite, of the simmonite LR empire. Hope this helps p.s, don't try to race him either as he's bloody fast !!!

1am in the morning behined a secure building !

Thanks Simon, it get's worse, just heard from the loss assesor that the police are not happy about the story given by the customer, so i may be in the middle of a fraud case !!!!!

Stolen from outside our customers premises on the morning of 23/07/2009, one of our hire fleet TIMBERWOLF 150 VTR tracked woodchippers s/n 207142002-A3 along with a HIGH PEAK TRAILER twin axle 2700kg s/n hptpt26600108. Chipper is a low funnel machine and has 485hrs on the clock and is as new, the trailer is fully galv with a one piece tailgate and also in very good condition. If anybody gets offered these items, or think they may know of any information regarding the theft could they please contact me on the following numbers. Andy Gould Global Sales Ltd Tel : 0121 7068617 Mob: 07973802242

Did you have fun monday, John ? was it one nil to the greens? :001_smile:

As a well established arb machinery dealer we tend to see every type of chipper you could possibly think of, some are good and some are bad, but i would agree that most of the chippers comming in from europe are of a high standard of engineering, only their paintwork seem to be suspect. however, should we not be supporting british manufacturing in these hard times, one of the reasons we are in this mess, is our in-ability to see how good we really are at research,design and manufacturing. Tony Turner (Greenmech) and Richard Marshall (Timberwolf) have produced some fantastic products over the years, and i know we will see some exciting new machines launched from both of them over the comming months and years. British chippers are supported by the most comprehensive dealer networks that anybody could need, if you need a demo ring your local dealer, you will in most cases get a demo within 48hrs, we don't need to go on tour. Were BRITISH so lets support BRITAIN. Andy Gould Managing Director Global Sales Ltd

Sorry that should have said 01/06/2009

Ok girls and boys, i've just booked Donnington (Focused events) for the 1/7/09 if anybody wants to come along and say hi, Just look for our silver citroen van with Global Sales sign writing, we usually try and nab a garage so let me know if your comming along and i'll save some space.

Mike, I'll get a pic of Rods ZX9R put up in the morn, and you can compare a complete shed against your minter !!!!

And available for hire and sale from Global Sales arboriculture and groundcare equipment

In the middle OULTON PARK DONNINGTON MALLORY PARK SILVERSTONE ROCKINGHAM Donnington and Silverstone are a tad expensive at the moment, Oulton a very fast Cadwell but sensibly priced, Mallory Park is very short but a good laugh for novices and cheap, Rockingham is crap and shortly to be houses. I'm game for any let me know.

Anybody fancy doing an Arbtalk track-day get together ?

07 Honda CBR1000RR in HRC colours. 06 Honda CBR600RR track bike and yet to be painted 95 Ducati 748s Having a JHP 853 kit fitted at moment

Hi chaps, if you give Mark a ring at Global Sales (0121 7068617) he has a kit that replaces all the old switches in the original box for sensible money.

Hi everybody, In these hard times we are expanding our business, which is good new for you. As a leading Forestry/Tree surgery and Groundscare machinery dealer based in Solihull, with close links with major manufactures like Greenmech and Kubota, we have a need for a talented person to take over the roll of General Manager of our busy Solihull based showrooms,parts and service centre. We are looking for a keen team player, who has a good eye for quality and service, must be computer literate,must be able to implement quality systems and control data flow at all times, it would also help to have a good knowledge of all things mechanical ( and a very good sense of humour ). If would like to have an informal chat, please contact me on the following numbers. Andy Gould 0121 706 8617 07973802242 Global Sales Ltd www.getitatglobal.co.uk Or e-mail me on [email protected]

Just a quick note to this that pete hasn't said, but due to an admin cock up with his insurance sharks non of the the kit apart from the LR was covered. This could have been far worse as he also had a 19/28 Greenmech SafeTrack in the yard that they could not get away with quickly so was left, I suggest that everybody double check their policies are fully in force as thefts will only increase as the economy gets harder. Pete if you need a loan of a road tow chipper, please give me a ring as i have a few p/ex around the yard that you can use. Andy.

Well done Kev, hard work and dedication will allways win through, i''ll support you as much as i can. Don't get offended by the negative remarks, in these hard times you need to shout good news from the roof tops and pat your own back, because nobody else will.

Hi Dave, The snow beat me to-day for the photos, but should be able to get some shots in the w/shop in the morning and i will e-mail the pics & specs for the 2 machines. Andy

Oh and another quick point if you bearings fail on your 190 please please please do not carry on running it to finish the job, as the bearings have a habit of spinning in the rotor we then have to machine the rotor oversize and press in a sleeve then machine back to bearing size, and this takes time and money non of use can afford at the moment.

Just another quick point about bearings, if the rotor is set up correctly you should never need to hit the bearing carrier to get the rotor to spin, all you end up doing is inducing side loading on the race which 50hrs later will fail, do it right first time, and remember set this all up correctly and you should get a much longer life out of the bearings