Second hand processor dealers?

[Gray git]

Spotted one for sale on here when i was in tenerife a few weeks back and was sold before i got home! 3.5k plus vat was gutted

 

Good machine for that money. I like it on small stuff that won't need splitting as can just cross cut and lob onto the conveyer or if you have billets that don't need splitting again just take knife out and cut away

[timbernut]

I have palax combi 2 mobile with 13 hp Honda, great machine, I do well over 150t a year with it. Replace main drive belts every yr or so, but that's about it

[Gray git]

Being self tensioning is definitely a benefit of the palax over the jappa on belts.

But I did like the slide rather than rock of the cradle of the jappa.

[Marko]

Most processors are fine sat on the ground with just the PTO connected, no need to be connected to the linkage, you can move it around with the loader.

 

I used to think the same but now always put the top link on. It can get very messy very quickly if the two separate. Apparently.

[skyhuck]

I used to think the same but now always put the top link on. It can get very messy very quickly if the two separate. Apparently.

 

Yes, top link or just a chain to make it impossible for the PTO shaft to telescope out and separate would be very sensible.

[Woodlandmilluk]

How about the woodland mills log processor?