Dolmar

[woodwizzard]

Is there a non cat exhaust that will go on the ea5000 and is there really much benefit in going that route? The videos I have seen of the ea5000/5105 seem lke they have plenty of go in them as standard.

[Daniël Bos]

Is there a non cat exhaust that will go on the ea5000 and is there really much benefit in going that route? The videos I have seen of the ea5000/5105 seem lke they have plenty of go in them as standard.

 

There is.

There is a factory made one available or you can remove it yourself, it's not hard and requires no special tools.

It makes a fair difference, in performance plus the cat weighs a ton!

[Sawchip]

Is there a non cat exhaust that will go on the ea5000 and is there really much benefit in going that route? The videos I have seen of the ea5000/5105 seem lke they have plenty of go in them as standard.

It is true that the 5105 runs very strong with out a "Kitty Kill" .

As has been said above ...plus i will add that the none cat muffler = "Much" less heat held in front of the cylinder.

[woodwizzard]

Any links for a factory one please?

[shavey]

You can get a direct replacement non cat muffler for the EA5000 the part number is the same for Dolmar/ makita 181.174.102

 

The only problem with this muffler is the outlet is on the top and the back of the outlet isn't closed down 100% so some soot will come backwards it's an easy fix with a smaller punch and hammer

 

Or I can do an exchange 5105 muffler already gutted out and you send me the restricted muffler back in the post

 

Photo below is the OEM normal mufffler

Edited March 10, 2017 by shavey

[shavey]

This photo is the OEM Kat muffler from Dolmar ps-5105c makita Ea5000

[woodwizzard]

The saw is brand new, so a little worried in sending you the standard in case it needs to go back on to preserve the warranty. How much are the standard ones and in your opinion does it make a big difference?

 

Is there a standard zorst for the 7900/price?

[bmp01]

Hello there,

I'm after a couple of parts for a PS410 I picked up recently. Am i in the right place, can you help ? Price, availability and overall p&p?

 

Air filter 028 173 041 or 141

Cover assy over air filter, 028 118 320

Cover fasteners

M5 x 60 908 205 605

M5 x 16 908 005 165

 

Thanks for reading.

 

bmp01

[shavey]

Good evening thanks for the parts enquiry

I've got some prices

Air filter flock £8.46+vat

AIr filter nylon £6.78+vat

Top cover updated part number £13.65+vat

Stud 908.205.605 £1.13+vat

Stud 908.005.165 £00.88+vat

 

Postage £2.95+vat

 

I've included a photo of the top covers listed

[shavey]

There's two different covers and some part numbers have been updated but the numbers pointing to the drawing are still in use

 

As and when delivery I won't know until I go and place the quote or if there in stock

Thanks

Andrew