SRT kit what combinations would you suggest.

[Will Heal]

Might be a stupid question but can you use a zig zag somehow for srt?

[MattyF]

Might be a stupid question but can you use a zig zag somehow for srt?

 

 

With a wrench but it's frowned upon !! It's very good though apparently

[Darrin Turnbull]

See if you can get a go on a petzl rig or isc d4 based RAD system. Can use as 1:1 or 2:1 without any re-rigging. Not as fast on the way up as many systems but quick enough, and much less effort if on 2:1. Very smooth work positioning and slack tending, also easy to mid line attach with no risk of dropping the rig.

 

 

Been using a cinch like that

[Darrin Turnbull]

Does the hitch loosen off a lot.

[Andrew McEwan]

Got the hang of 1:1 with it? and leaving ascender near stem for easy 2:1 return from downwards limb walks? I like the way you can ditch the footloop once in the canopy for 2:1, and aren't having to stick a pantin back on, or sort a neck loop.

[Darrin Turnbull]

Actually if you have a second person pulling the slack out while (rads) ascending its fast enough.

[colemanjessenz]

What about this.

[ATTACH]195555[/ATTACH]

[ATTACH]195556[/ATTACH]

 

free worker does horrible teathers ..... don't bother with any of them , the best one you can get in Germany is probably the @height one that climb tools is stocking.

[Darrin Turnbull]

free worker does horrible teathers ..... don't bother with any of them , the best one you can get in Germany is probably the @height one that climb tools is stocking.

 

 

Thanks for the tip

[Darrin Turnbull]

free worker does horrible teathers ..... don't bother with any of them , the best one you can get in Germany is probably the @height one that climb tools is stocking.

 

 

Is it this one

STERLING - ROPE WRENCH PUSHER

[colemanjessenz]

Is it this one

[ATTACH]195587[/ATTACH]

STERLING - ROPE WRENCH PUSHER

 

No thats a different one , I will have a look