Tip tie rigging with the x rigging rings.

[JaySmith]

Jay. I got quite a few from treekit. Reasonably priced and he does the Tenex aswell to make the slings.

 

I made a 4.5 metre whoopie with the beast rings.

 

Cheers rich. So basically you have to buy the rings for say £15 or so then splice/attach the sling, do they not come as one unit all ready to go?

[JaySmith]

I have this as my top anchor but really depending on what angles I can create with the LXRR to make it easy.

[ATTACH]174975[/ATTACH]

 

And a little chart for you mate

[ATTACH]174976[/ATTACH]

 

The beast ring is not on this chart!

 

Nice one cheers mate I'll have to do a bit of research into them!

[treequip]

You can buy the rings from chandlers in the UK, they are made by Antal, just google antal rings and buy your single braid from Nod at treeworker.

 

It worked for me

[Arran Turner]

I really like it but a load of the firms I sub for have a Krab permanently attached to the rigging line with the tightest Fishermans knot known to man.. When I have my own rigging kit I reckon I'll own a set for sure..

[Rich Rule]

Cheers rich. So basically you have to buy the rings for say £15 or so then splice/attach the sling, do they not come as one unit all ready to go?

 

Basically mate, yes. A bit more than 15 quid though.

 

The beast rings are very large and can handle 19mm rope easily. Just for reference the yellow tenex on the woopie I made is 19mm. All in all though the cost is far less than a 19mm impact block and deadeye to connect it with.

[Joe Newton]

I really like it but a load of the firms I sub for have a Krab permanently attached to the rigging line with the tightest Fishermans knot known to man.. When I have my own rigging kit I reckon I'll own a set for sure..

 

 

My thoughts exactly. Every time I have to take the karabiner off the rigging line gets shorter by a foot or so!

[Adam Bourne]

I really like it but a load of the firms I sub for have a Krab permanently attached to the rigging line with the tightest Fishermans knot known to man.. When I have my own rigging kit I reckon I'll own a set for sure..

 

 

That's easy just carry a shape knife where ever you go! Haaa!

 

Only ever temporary put a bina on my ropes when I see the need to. Otherwise there off and it's back to hitches

[Rich Rule]

My spliced eye on my 16mm polydine fits through the beast rings.

[Adam Bourne]

Basically mate, yes. A bit more than 15 quid though.

 

 

 

The beast rings are very large and can handle 19mm rope easily. Just for reference the yellow tenex on the woopie I made is 19mm. All in all though the cost is far less than a 19mm impact block and deadeye to connect it with.

 

 

I did a little comparing here just to give people a little insight

 

😊

 

LXRR that's the seconded biggest 28x20, compared to the pinto rig.

 

 

Pinto....weight 159g

LXRR.... 120g

 

 

Pinto.... Max rope Dia 16mm

LXRR.... 28mm

 

Pinto.....strength 50kn MBS

 

LXRR..... Unsure of the MBS but a

SWL of 6400kg

 

 

Pinto......bend ratio of 30mm

LXRR...... 31mm

 

Max spicing diameter

Pinto... 14mm

LXRR....20mm

 

Pinto cost £34 +VAT

 

LXRR cost £14+VAT

 

You decide

[Adam Bourne]

My spliced eye on my 16mm polydine fits through the beast rings.

 

 

Would it go through the LXRR mate?