Husqvarna 540xp problems

[Phil71]

Phill .. Last time I worked with you ,you was topping out a conifer hedge in your budgie smugglers

 

 

Sent using Arbtalk Mobile App

 

Yes, but chainsaw proof budgie smugglers!

[bobh]

Yes, but chainsaw proof budgie smugglers!

 

You'll end up with Betty swallocks wearing them! 😁

 

Sent from my Nexus 7 using Arbtalk mobile app

[Phil71]

You'll end up with Betty swallocks wearing them! 😁

 

Sent from my Nexus 7 using Arbtalk mobile app

 

On the plus side, no more T-shirt tan! The back, sack and crack is a pain though!

[Riggerbear]

Two or three times over the last couple of weeks my 540 just rev'ed up on its own without touching the throttle. I'd turn it off to try to reset it and when started again it was fine. Then Monday morning I went to start it and it wouldn't run at all.

Any thoughts ?

If the husky dealers plug these auto tune saws into their diagnostic devices, what does it tell them ?

Back to the 200t for the time being !

[Pete Mctree]

A raise in revs can be something as simple as a blocked fuel filter - you checked it?

 

Can't help past that, sorry

[Riggerbear]

It's was different to a raise in revs that you'd expect from fuel starvation, it was instant and held 2/3 revs with no change until I turned it off.

Thanks for the input though Pete.

[CJM]

Where's stubbie?

 

In all seriousness you sould take it back to the dealers it sounds like you need a software update

[Treespotter]

The Husqy dealer can see everything when they plug in the saw. Go there and find out what the problem is before accidents occur.

[Stubby]

The Husqy dealer can see everything when they plug in the saw. Go there and find out what the problem is before accidents occur.

 

Can he see tonight's winning lotto numbers ?

[Stubby]

Where's stubbie?

 

In all seriousness you sould take it back to the dealers it sounds like you need a software update

 

Split impulse hose from dropping on the strop ? Only stretches a small amount .