Jump to content

Log in or register to remove this advert

Best oil for Teak?


Billy
 Share

Recommended Posts

i do believe that there are versions of danish oil that can have a varnish type material in it but most are just 50% tung oil and a mix of other natural oils.

 

for an indoor table it would be perfect to get that natural look without the obvious look of somethings been applied...

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 30
  • Created
  • Last Reply

Top Posters In This Topic

I've never seen a Danish oil that didn't contain Varnish. I've just finished a picnic table that I didn't realise was an oily hardwood. The wiping varnish has lifted and I will have to strip it down and seal with shellac first. Oak and others are fine but those oily tropical hardwoods can be really difficult.

 

I shall strip, sand then degrease with acetone before coat of shellac. Sand back when dry and recoat shellac before varnishing.

Link to comment
Share on other sites

I've never seen a Danish oil that didn't contain Varnish. I've just finished a picnic table that I didn't realise was an oily hardwood. The wiping varnish has lifted and I will have to strip it down and seal with shellac first. Oak and others are fine but those oily tropical hardwoods can be really difficult.

 

I shall strip, sand then degrease with acetone before coat of shellac. Sand back when dry and recoat shellac before varnishing.

 

Very surprised by this.

 

I have used Danish oil and teak oil on oily timbers like Iroko without any problems but this was on internal work. So deed it peel off?

Link to comment
Share on other sites

I would try Liberon finishing oil, or danish oil , turn the table upside down and do a few test patches on the underside of the top to see how it goes . Both oils are fine but LFO is a bit easier to work, less sticky , and easier to clean of your hands !! Why is the table unfiished ? do you want a matt , satin or gloss finish ?

Link to comment
Share on other sites

i've really only used danish oil so have no experience of others but danish will do what you ask just enrich the colour a bit.

 

are you sure that's teak? looks a little red.

 

That's what I thought, Yew possibly?

 

Sent from my Nexus 7 using Arbtalk mobile app

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.