Makita DCS9010 - what oregon mount?

[Rob D]

Hi again guys, the bar from my 576xp didn't fit the 9010, how to I get hold of the 8mm bar mounts ? D009 mount I think

 

 

Sent using Arbtalk Mobile App

 

 

What stops it from fitting Ed - can you get any more pics to show what is not fitting where?

[Eddy_t]

Judging by the pics, it'll be a D033 mount, or what ever the other stihl mount is called (one for the 660)

 

 

Sent using Arbtalk Mobile App

[WoodED]

What stops it from fitting Ed - can you get any more pics to show what is not fitting where?

 

 

Hi rob, the two 12 mm round bits at the bottom,

 

 

Sent using Arbtalk Mobile App

[shavey]

hello ed i ground my studs off with a lathe down to the right thickness but if you take them out and go to a dealer or find old scrap saw and take them out there is a 8mm thread underneath that flange 100% cheers

[Rob D]

Hi rob, the two 12 mm round bits at the bottom, [ATTACH]151507[/ATTACH]

 

 

Sent using Arbtalk Mobile App

 

 

Thanks Ed - so it's not a straight D009 mount - but would be if you ground off these bits... still a bit of a hassal - I wonder why Makita choose to have these on here in the first place?

[WoodED]

Thanks Ed - so it's not a straight D009 mount - but would be if you ground off these bits... still a bit of a hassal - I wonder why Makita choose to have these on here in the first place?

 

 

To be a pAin in the bum, do you supply d009 mounts rob?, or know anywere that does?

 

 

Sent using Arbtalk Mobile App

[Eddy_t]

To be a pAin in the bum, do you supply d009 mounts rob?, or know anywere that does?

 

 

Sent using Arbtalk Mobile App

 

 

Anywhere that does bars for the 70+cc huskies

 

 

Sent using Arbtalk Mobile App

[broonie]

I replaced mine with 8mm thread exhaust manifold studs, use 24" Sugihara off the 395.

[shavey]

with the 8mm studs the bar iam using is 320RNDD009 100% the only reason i changed the original bar was because it was a solid nosed bar so i was trolling ebay us and came across this 32'' oregon bar chain combo it was listed as fitting solo 603, 690, 694 and dolmar 7900, 7910 9000 , 9010. knowing that the solo 690 and dolmar 9000 was the same saw but after doing some research the american models had the 8mm bar studs not the 12mm studs that we have in europe but one plus that came out of this mix up is i got a new dolmar bar for the 133

[harvey b davison]

Can i just ask what size studs come on the 7900, and what bar mount does it have ?