Makita DCS9010 - what oregon mount?

[Rob D]

Can anyone say for definite what oregon mount the Makita DCS9010 is?

 

 

Oregon seem to have it double listed as either D033 or D009....

 

 

[TimberCutterDartmoor]

D009 of that I'm sure...

 

Same as Dolmar PS-9010. Oregon Product Selector Guide agrees...

Edited March 10, 2014 by TimberCutterDartmoor

[Rob D]

Good stuff! Ta

[tree_beard]

get ed to try one of his husky 576 bars to see if it mates up... :-p

[shavey]

i agree with jon on this ORNDD009

but if the makita uses the same studs as the dolmar PS 9010 i have just bought then the bar mount studs are bigger and the only bar that will fit is the large mount husky 395 3120 / dolmar 133/143 RNFDO009 or change the studs to 8mm like i have just done and now can use a range of bars

[Rob D]

Thanks- the D009 mount is easy enough to source and gives plenty of options...

[broonie]

I changed to 8mm studs too

[WoodED]

Evening guys and girls, looking at my mak it has these mounts, I shall try the 576xp bar on it tommorow

 

 

Sent using Arbtalk Mobile App

[shavey]

Evening guys and girls, looking at my mak it has these mounts, I shall try the 576xp bar on it tommorow [ATTACH]151061[/ATTACH][ATTACH]151063[/ATTACH]

 

 

Sent using Arbtalk Mobile App

 

hello Ed these studs are the same as my dolmar 9010 i turned them down on the lathe till they fitted in the bar snug until i got time to new ones the large mount husky 395 , 3120 or large mount sachs dolmar 133 .143 :thumbup:

[WoodED]

hello Ed these studs are the same as my dolmar 9010 i turned them down on the lathe till they fitted in the bar snug until i got time to new ones the large mount husky 395 , 3120 or large mount sachs dolmar 133 .143 :thumbup:

 

 

So a 3/8ths bar for a 395xp will fit?

 

 

Sent using Arbtalk Mobile App