Jump to content

Log in or register to remove this advert

remapping truck engines


Johny Walker
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 22
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

Always go for a remap over a chip. Most ecus from 2000 onwards will be remapable, all your doing by chipping the vehicle is removing the "non remappable " chip in the ecu and solder in a mappable one, each engine and ecu will have differance potentials, post what vehicle and engine hp you have and I can tell you what you should see in an increase, I specialise in light commercial vehicles such as transits, mercedes, ivecos ect, and hgv's, it's quite rare if you don't see a mpg improvement, we tend to get 1mpg better on the large hgv which is a saving of about 10% on fuel.

Link to comment
Share on other sites

Always go for a remap over a chip. Most ecus from 2000 onwards will be remapable, all your doing by chipping the vehicle is removing the "non remappable " chip in the ecu and solder in a mappable one, each engine and ecu will have differance potentials, post what vehicle and engine hp you have and I can tell you what you should see in an increase, I specialise in light commercial vehicles such as transits, mercedes, ivecos ect, and hgv's, it's quite rare if you don't see a mpg improvement, we tend to get 1mpg better on the large hgv which is a saving of about 10% on fuel.

 

What could you achieve ( barring total destruction ) on a YD25 engine in a D22 pickup . Oil and filter changed religiously every 6K . EGR blanked off ,about to fit a stainless exhaust with the possibility of fitting casting that holds the diesel particulate filter with no DPF in it . Have a spare and removed filter but not fitted it yet as I understand the laws have just changed re the mot . It would still look like there was one there but there would be nothing inside it .........( moral issue as well I suppose ) ....?

Link to comment
Share on other sites

I work for mercedes benz commercial, so for people who don't know that vitos, sprinters, unimogs, the truck range and mercedes own about 90 of the canters now aswell, also have my own tuning company on the side, long story short I brought a master tuning kit to allow me to choose who and were I buy my modified maps from. 99% of my maps are stage 1 which is a mixed map of power gains with, if driven the same as before the map is done you will see better mpg, dpf needs to be there for mot, we cut and remove and inners, looks like it's still there then, depending on the age of the vehicle they might have pressure sensors in there, then we would have todo a remap to tell the vehicle they haven't got one any more

Link to comment
Share on other sites

What worries me is modern cars seem to be coming out the factory with more power and running better MPG which is what we expect from a re-map but they also dont seem as reliable.

 

I hear what your saying, I've worked for mercedes main dealer for 10 years, and have seen a great differance in this too, yes the manufacturer is getting or pushing more power from the same size engine we did 10 years ago, the the move in technology and martials have aloud this, and causes very little reliability issues, the issues is the emmions tear system the government keep pushing, were on euro 6 now, with ad blue technology and egr running side by side, due to these systems being emmions related, them must bring on warning lamps, and 99% of the time will cause lack of power (safe mode) this is so you the customer have to take to a workshop and have the fault fixed so the emmions are running correct, 80% of the repairs we do is.for this reason

Hope this helps

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.