Spuds Porting and Tuning Thread

[Eddy_t]

Back to porting the 560, the shaping, polishing and grinding is done now

I didn't widen the exhaust port much due to some slot-things on the piston, but I did reshape the uppers!

Unfortunately reassembly has to be put on hold as I've lost 2 bolts for the intake, so I'll have to get the muffler done and finish the engine in January.

[Eddy_t]

Yes, it's a big pipe, didn't look that big until I fitted it into the muffler it's all reassembled now, big filter fitted, the lot! Now to run it and see if I've cocked up, or made a belter!

[Stubby]

[ATTACH]173494[/ATTACH]

Yes, it's a big pipe, didn't look that big until I fitted it into the muffler it's all reassembled now, big filter fitted, the lot! Now to run it and see if I've cocked up, or made a belter!

 

On the edge of my seat here Eddy ! come on bud , come on spill !

[spudulike]

[ATTACH]173494[/ATTACH]

Yes, it's a big pipe, didn't look that big until I fitted it into the muffler it's all reassembled now, big filter fitted, the lot! Now to run it and see if I've cocked up, or made a belter!

 

Seen smaller on boy racers Pugs:lol: Did your wife mind you taking the cast iron drainpipe off the side of the house:lol:

 

We will probably hear it across the country:lol:

[Chris3King]

I'm dying to see and hear this!

[div_h]

Me 2! How's your new saw chris3kings mines is fu@&:!:! 😂

[Chris3King]

I'm very happy with it so far. Would like to see how a 550 and 560 goes spudded up

[div_h]

Good stuff👍I would like a saw that works:001_rolleyes:

[Chris3King]

Your old one has been flat out!

[div_h]

Your old one has been flat out!

 

How's the fuel consumption compared to your other saws?