Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

iv been given a old lister diesel engine,in excellent running order.

the engine i have is the same as in the picture

just wondered if anyone has made a saw bench with one?

as this is going to be the next project..

the air cooled engine is 300cc and runs at 1000rpm

 

was it easy to do? what size cutting disk is best suited for the engine?

 

thanks in advance

7f8e_12.jpg.13c3fd502141a38824bdb21718e3212f.jpg

  • 5 months later...

Log in or register to remove this advert

Posted
The engine you have there does not look big enough!! To cut a decent log efficiently you are likely to need 15+ Hp. Although there are small saws about.

 

same as, think you will need a bigger motor.

Posted

In a field near andy collins two old men used to do firewood with a saw bench run with a flat belt from a tractor with a flywheel on it. At my yard i have a sandstone the old woodmen used to sharpen tools with and it was turned by hand i was wondering could i run this off a small stationary engine my brother has a whole shed full:001_smile:

Posted

is that a lister 'd'engine- i think they are only 1hp!! You wil need much more to run a sawbench. Tart it up and sell it to one of those old guys at country fairs who wear flat caps.....

Posted
is that a lister 'd'engine- i think they are only 1hp!! You wil need much more to run a sawbench. Tart it up and sell it to one of those old guys at country fairs who wear flat caps.....

 

yes lister d engine.. runs slow.. max rpm id say is prob 750rpm?

just wondered if anyone had made a saw bench with one?

be interesting to see picts..

 

if its not possible, its getting covered up and going back behind the shed...:blushing:

Posted

Tart it up and sell it to one of those old guys at country fairs who wear flat caps.....

 

I wear a flat cap cheaky tw@t and i aint that old!...........:001_tongue:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.