How to keep rope in pantin?

[Alinicoll]

when you lift your pantin foot instead of moving straight up use a back pedaling motion. This presses the rope against the solid part and away from the cam.

[edwood]

Make sure your sending your foot downwards and not out away from you

 

 

Sent using Arbtalk Mobile App

[LumberJake]

Cheers for all of the replies! I'll next be up a tree on Wednesday so I'll let you know how i get on with the tips!!

 

Jake

[LumberJake]

Pantin worked an absolute dream today!! The back pedaling motion kept the rope in place the whole time!! Thanks for the help!!!

 

Jake

[Rich Rule]

Another thing to note... if the pantin is set too high, adjust it so it is as low as possible and it'll not pop out.

[Dan Earp]

Keep ur toes pointing down a lil bit and when ur ready lift them to release bud

[RobRainford]

Use the non pantin foot and step on your pantin foot toes when you stand up. Makes going up a bit easier

 

As for the rope not coming out, I echo the back pedal motion. Up forward and back pushes the rope in and works enough!

 

 

Sent using Arbtalk Mobile App

[Stuart Witt]

when you lift your foot up try NOT kick your heel back.

 

Just try a simple knee raise as if you were standing on the floor! By doing so this will help to keep the rope into the back of the body of Pantin.

 

Also if you try and make sure your rope is hanging dead straight, as if there are deviations this will change the angle of the rope hence changing the exit angle out of the pantin and causing it too pop out.

 

hope make made sense?

 

If all else fails go out and buy the new shampoo called pan-tin-pro-vee, its sure to help all the problems over having. lol

[carlos]

isnt there a hole near the cam where you can place a krab?? cant rember with out looking lol

[LumberJake]

isnt there a hole near the cam where you can place a krab?? cant rember with out looking lol

 

There is a hole in the old style pantin for a small biner but I have the new model and there is no hole.