Jump to content

Log in or register to remove this advert

Telescopic pole saw comparison?


18 stoner
 Share

Recommended Posts

Only used the stihl like others couldn't live with out it.

Have a look at the Kombi. this is much more versatile

anything less than 35cc is a waste of money if you are going

to put it to good use.

 

I disagree. The only thing you need more power for is strimming, and if you do lots of strimming you need a proper clearing saw.

 

I've run an FS-85, and now an FS-70 (both 27cc) on a 12" polesaw, bed tiller and hedgecutter and it is plenty of power.

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

I have a stihl 131 4mix its ok, powerful but the 4mix can be trouble.

 

If I was buying again I would get the echo pole pruner ,2stroke and better built than the new stihl.

 

Simply replace your engine with a new two mix one. FS-70 available now, next year will probably see the release of higher CC 2-mix engine.

 

http://arbtalk.co.uk/forum/general-chat/62516-heads-up-good-replacement-engine-stihl-polesaws-pole-hedgcutters-combi-units.html?highlight=heads+replacement+engine

Link to comment
Share on other sites

Simply replace your engine with a new two mix one. FS-70 available now, next year will probably see the release of higher CC 2-mix engine.

 

http://arbtalk.co.uk/forum/general-chat/62516-heads-up-good-replacement-engine-stihl-polesaws-pole-hedgcutters-combi-units.html?highlight=heads+replacement+engine

 

Just replace it with an echo, better built full stop.

Link to comment
Share on other sites

I've had the Stihl pole saws since them came out, the first ones would wear out the roller bearings on the shaft after 6 months and were expensive to replace and fix, I've had the 4

Mix 1 now for about 4 years I think, it's never given me any bother and runs like new.

I use the hedge cutter head on it a lot which adds much more stress to the shaft when extended, so there is a little twist or bend in it, but that's through the abuse I give it, and it's not made for that.

Link to comment
Share on other sites

just put an fs240 power unit on,pole saw on steriods ,tons of power :thumbup1:

 

Ok, so all this talk of fitting this engine to make it a good pruner, correct me if I'm wrong, but the idea here is to pay 600 quid for the initial pruner, throw the engine away and spend another 350 quid on a real engine?

 

Have I missed something?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.