262xp help please

[sweepy]

thread resurrection!

this went on the back burner as I got nowhere, however I now have a woodburner again so I'm having another crack at it. Having a hell of a job getting the clutch off, just grind the end of the socket flat you say?

 

Wont start now so carbs off to be cleaned, given it a good spray with carb cleaner and will put new gaskets on, will also bung a new spark plug in. the coil(?) lead comes out at the module, is it a push in or do I need a new one?

 

Anything else I need to look at?

 

Thanks for the help, my other option is get a 435 but I reckon this will be a better saw if I can get it going and cash is a bit tight right now

[Gary24]

You mentioned a 435,great little saw and only about 240 quid at the moment at FRJones:thumbup:

[openspaceman]

pologies to mikerecike all those years ago but here is the picture of the socket I used

 

[wicklamulla]

i gotta mint 262xp in me arsenal.

[openspaceman]

i gotta mint 262xp in me arsenal.

 

It's the saw I used most but I already have two or three left over.

[forest tink]

launch it in the bucket and stop being so tight,get yourself a 560 lol

[sweepy]

Yep, I know I'd probably do better with something new, but Ive torn the arse out of that saw for years and I like it.

I'll set about a socket with the grinder and see how I get on:001_smile:

[sweepy]

Success! thanks to the advice on here the clutch is off, the brass pinion looks ok but the oilpump is pretty stuck. Got a used one off ebay ready to put on.

 

I think the next thing to look at is the ignition module, the wire pulls out, should it do that?

Anyone know where I might get one, used or decent copy would be fine.

[Stubby]

Success! thanks to the advice on here the clutch is off, the brass pinion looks ok but the oilpump is pretty stuck. Got a used one off ebay ready to put on.

 

I think the next thing to look at is the ignition module, the wire pulls out, should it do that?

Anyone know where I might get one, used or decent copy would be fine.

 

Get a black ( un guverned one ) then send the whole saw to spud for a good porting job !

[spudulike]

Success! thanks to the advice on here the clutch is off, the brass pinion looks ok but the oilpump is pretty stuck. Got a used one off ebay ready to put on.

 

I think the next thing to look at is the ignition module, the wire pulls out, should it do that?

Anyone know where I might get one, used or decent copy would be fine.

 

Which wire? The HT wire or the kill wire? The HT wire should screw in I believe! If the coil can spark across 5-8mm, it should be OK!

Edited January 1, 2017 by spudulike