Unimog with reversing gearbox users feedback

[Stephen Blair]

Hi, has anyone on here put a TP or any other standard pto chipper onto the front of their Mogs using a reverse gearbox?

 

It's been covered here and there but would like some fresh feedback from actual users, cheers:thumbup1:

[david]

i tryed it with my u900 and tp760. mounted on a 3pl so was 2foot infront of the bumper. couldnt blow over the cab and was too heavy on the front axle so never really worked

[agrimog]

not used one with a chipper, but have run various bits of pto driven kit on the front of my mog instead of the back, just got to watch the lengths of the drive shafts, and be carefull about who's reverser box you use, there not all created the same!!!!!

[skyhuck]

My schiesling front mount chipper has a built in reversing box, its never given and trouble.

[Stephen Blair]

It was more the adding in Huck, the bolt on ones.

 

I am speak to Alex this week and take his advice.

[aspenarb]

We have had most permutations of mog pto driven kit and always reverted to going on the back. Our TP is rear mounted with a three way tipping box. We have got the reversing box kicking about somewhere that we dont use any more.

 

Bob

[Stephen Blair]

My mog has a rear mounted hiab, chip box, no back arms and a pto.

I want front mount so I can use hiab and pull trailer .

 

Pm me a price for your reverse gearbox and if I go down that rd I will contact you.

Thanks Stevie

[Stephen Blair]

I ended up just buying a front mount Ducker, my TP 250 was too heavy for the u1200.

[Big J]

Did you not find any useful information in the Technics instruction manual?