Chipper exit chute extension

[aspen]

Evening all,

 

I have a timberwolf 150 & would like to add an extension onto the exit chute to prevent spillage etc. Maybe a section of drainage pipe could be added before chipping and removed when finished. I appreciate this may look a bit gypo so any other ideas are welcome.

[geoff]

Its worth a go,I will be interested how it works out,so pics & a report are in order!

[skyhuck]

You may find it just blocks more often.

[Billy]

A traffic cone with the small end re shaped works quite well.

 

 

Sent using Arbtalk Mobile App

[felixthelogchopper]

Could you boost it with a blower?

[aspen]

A traffic cone with the small end re shaped works quite well.

 

 

Sent using Arbtalk Mobile App

 

Thats even more gypo than my idea.

[Billy]

It is gypo but effective if you have a messy chipper it works, secure in place with bungies. Alternatively you could fabricate a new tip for your shoot or repair the existing one

 

 

Sent using Arbtalk Mobile App

[aspen]

You may find it just blocks more often.

 

Good point, especially when stuff is wet.

May have to try it anyhow.

[geoff]

Maybe get some steel pipe,& coat it with a teflon spray?

 

teflon coatings from Impreglon UK

[aspen]

It is gypo but effective if you have a messy chipper it works, secure in place with bungies. Alternatively you could fabricate a new tip for your shoot or repair the existing one

 

 

Sent using Arbtalk Mobile App

 

I was thinking something a bit longer than a cone anyway.