Jump to content

Log in or register to remove this advert

zig zag failure?


Dilz
 Share

Recommended Posts

Just had a thought, what if you had two climbers at about 100kg, one rescuing the other, total non-dynamic load 2kN. In a rescue situation, descents can be jerky at best and you may have to pull the victim off or over a branch, easily adding another 2kN. So where does that leave you with safety factors? 15kN/4kN= safety factor of 3.75, not great.

I don't have a zigzag, unlikely to be getting one, but if I did I would be worried about using one for rescue.

 

Sure, you might consider reitiring the kit after the rescue because you had used it beyond its SWL but it would still be far enough away from MBS to carry out the rescue. This goes for all kit. And same for rigging too, if you push the limits and go over SWL you will surely get away with it but the kit might have to be retired early. Its called cycles to failure, where going over the SWL can recuce the MBS over time causing eventual failure below MBS. As a one off though, just get on rescue the person!

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 391
  • Created
  • Last Reply

Top Posters In This Topic

Facts, not supposition. Nice to see Petzl's response.

 

I've found that after work around a tree, the zigzag upper carabiner has become cross-loaded. Re-orientated it and worked on or descended when finished.

 

So, ordering a couple of the little rubbers to see if they will keep the upper krab properly orientated. And no YouTube, awe-inspiring fast descents.

 

I looked at the mini strop setup, but wonder what the jagged edge would do to that with the forces involved?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.