Jump to content

Log in or register to remove this advert

Recommended Posts

Log in or register to remove this advert

  • Replies 30
  • Created
  • Last Reply

Top Posters In This Topic

Posted

Well i just dont know??? the lubrication properties are good but i suspect that its too viscus, tho maybe you could add it at a lower concentration?

 

Ive just started producing my own biodiesel so have lots of nice filtered and de-watered waste veg laying around.

 

What i dont have is an old saw surplus to requirements to experiment with.

Posted

Use it from time to time, find it gums up the chain a bit and blocks the oil hole in the bar, but its free and proper stuff is rediculus expensive so all good

Posted

I use rapeseed oil. It's locally grown and pressed, clean and food-safe (I lick up any spills), biodegradable, I've used it in -15 with no waxing and cheap (same price as diesel...)

It's been fine without any problems when used exclusively. The only issues I've had is when I topped up a saw that was half full of stihl mineral stuff, it turned into chewing gum. So when I "convert" a saw, I run it empty, run some petrol through it and then fill with veg.

Posted
Well i just dont know??? the lubrication properties are good but i suspect that its too viscus, tho maybe you could add it at a lower concentration?

 

Ive just started producing my own biodiesel so have lots of nice filtered and de-watered waste veg laying around.

 

What i dont have is an old saw surplus to requirements to experiment with.

 

You mean less viscous; rapeseed oil from supermarket is much thinner than mineral chain oil. Turn your oiler up full!!! Flings of FAST!

 

I use rapeseed oil. It's locally grown and pressed, clean and food-safe (I lick up any spills), biodegradable, I've used it in -15 with no waxing and cheap (same price as diesel...)

It's been fine without any problems when used exclusively. The only issues I've had is when I topped up a saw that was half full of stihl mineral stuff, it turned into chewing gum. So when I "convert" a saw, I run it empty, run some petrol through it and then fill with veg.

 

spot on; same here; much cheaper and bio safe.

Posted

One of the cons from my point of view is that when I take a saw apart to work on or fix the bio oil seems to gunk the saws up more than mineral based chain oil and are harder to clean.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.