The Land Rover Appreciation Group.

[Gray git]

If it's square sticking out just use a normal spanner to grip it, if it's a square sticking in use a ratchet to fit into the recess and undo it.

Hop that made sense.

[humpo48]

  Gray git said:

If it's square sticking out just use a normal spanner to grip it, if it's a square sticking in use a ratchet to fit into the recess and undo it.

Hop that made sense.

 

 

Yea that does make sense thanks, it's the ones sticking out. Thanks

[mendiplogs]

  humpo48 said:

Want to replace and renew the swivel grease. The bolts for the drain and fill holes are square, do I need a special square spanner or can I just use a normal spanner?

 

HI IAN we only use open end spanner mate ian thanks jon

[humpo48]

  mendiplogs said:

HI IAN we only use open end spanner mate ian thanks jon

 

 

Cheers Jon using the one shot special grease for them

[mendiplogs]

  humpo48 said:

Cheers Jon using the one shot special grease for them

 

HI IAN one shot per hud mate in the very hot weather ours was coming out that the best way to put it thanks jon

[Charles Hey Arborist]

  humpo48 said:

Cheers Jon using the one shot special grease for them

 

I though if you're using the one shot grease you don't drain and recharge just top up.

If the swivel has a drain you use EP90?

[humpo48]

  Charles Hey Arborist said:

I though if you're using the one shot grease you don't drain and recharge just top up.

 

If the swivel has a drain you use EP90?

 

 

Hi, the one shot grease is an up grade to EP90, it's thicker and than EP90 which has the tendency to leak out. You need to drain out the old and refresh with the new grease. It's what's used on the newer defenders etc. you need to warm it up first to squirt it in. Doing it as a service.

 

This is what I have researched but please tell me if I am wrong??

Edited September 24, 2014 by humpo48

[Charles Hey Arborist]

  humpo48 said:

Hi, the one shot grease is an up grade to EP90, it's thicker and than EP90 which has the tendency to leak out. You need to drain out the old and refresh with the new grease. It's what's used on the newer defenders etc. you need to warm it up first to squirt it in. Doing it as a service.

 

I thought the old type swivels with a drain had a different seal, around the wheel bearing maybe?

The new type swivels TD5 and newer don't have drains do they?

Not sure I'll have a look under mine later.

 

 

Diff breathers- my 2 landys have different types- one is a 14mm spanner, the other a plastic elbow that pushes in.

I'd like to buy a kit for each as both are a little blocked. Any one know where to buy both types in kit form?

[humpo48]

Mines a 300tdi best double check now? Have a look later. Thanks for the info

[Charles Hey Arborist]

  humpo48 said:

Mines a 300tdi best double check now? Have a look later. Thanks for the info

 

Hopefully someone will come along and clarify