Jump to content

Log in or register to remove this advert

Push bikes and punctures


Andy Collins
 Share

Recommended Posts

what has happened to the quality of puncture patches these days, i used to whack those little blighters on in seconds, air up and away we go. Nowadays they just seem to be ike everything else, low grade rubbish! I got me a new kit out of cycle shop in town yesterday, just in case, and went out this am and managed to pick up a leak. Just used 3 patches, they just drop off, is it the glue, or the patches, or both? I dont recall these problems in times gone by.

Link to comment
Share on other sites

Log in or register to remove this advert

It's not just the patches. I rode a lightweight GT road bike for 20,000 miles around South London/Surrey and had maybe 20 punctures on narrow tyres at 70+ psi. Then I bought a hybrid 'Land Rover' branded bike for road/good path cycling and can't get more than 10 miles without a flat. And you're right; the patches just don't hold. But it seems the tyres they're meant to stick to aren't much better.

Link to comment
Share on other sites

Probably like most things they have taken some of the solvents out to protect the enviroment. Our 2004 merc vito rotted into the floor as it was sprayed with water based paint. I cant see solvent in glue making much difference when you see the fumes in a petrol station but thats life, worlds gone mad. Next thing you know we will have hole countries going bust and getting their own currency. :biggrin:

Link to comment
Share on other sites

I buy strips of patches and vulcanising solution from a bike shop and I find now that you really need to let the glue almost dry before applying the patch. Then leave the paper or foil backing in place until the glue has cured properly or the edges will start to come unstuck.

Link to comment
Share on other sites

what has happened to the quality of puncture patches these days, i used to whack those little blighters on in seconds, air up and away we go. Nowadays they just seem to be ike everything else, low grade rubbish! I got me a new kit out of cycle shop in town yesterday, just in case, and went out this am and managed to pick up a leak. Just used 3 patches, they just drop off, is it the glue, or the patches, or both? I dont recall these problems in times gone by.

 

Its the quality of glue now made due to EU control :thumbdown:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.