Stihl MS390?

[gensetsteve]

I have a ms 390 and a 260 . The 390 has alot more grunt without being hard on the back. If I am cutting 10" stuff 260 allday if its mainly over 13" 390 is better. I have a 20" bar .325 so bit more power. I have been ringing 3ft stuff from either side should really buy a bigger saw but have better things to spend £800 on. I paid £150 for it about 3 years ago and its done a few hundred hours and we just clean the filter and put fuel in it.

[swinny]

What about a 034,036 or better still 044

[rovers90]

Thanks for the comments guys, I'll stay clear of the 390 then (thought they looked strange with an orange handle anyway). May pop for a 340/1 or 360/1 if I can save some spondoolies.

[High Scale]

I was given one to look at.

 

 

"It's not running right"

 

 

Horrible saw to dismantle, horrible saw.

[spudulike]

I did tell you:thumbdown:

[GardenKit]

Horrible saw to dismantle, horrible saw.

 

Even worse to reassemble!:lol:

[gensetsteve]

So if mine plays up stick it on ebay and by a Huskey yes

[rovers90]

So if mine plays up stick it on ebay and by a Huskey yes

 

You can stick it on ebay but I wont be buying it now Steve!

[WoodED]

what u want is a husqvarna 576xp

[gensetsteve]

All the saws above are better but u wont find a decent used 440 or similar for less than £300 . But if you find a mint 390 for £150 you will earn it back in a week or occasional use why buy a proper saw. You cant see the handle when its in use