576 xpg Auto tune

[Kenny]

Ill have to get back to you on that i only picked it up today. But my thinking were its been out on that saw a fair while with no major problems??

 

Yes do so. Write some pros and cons here when you tried it.

[SAM66S]

After trying the 576xpg autotune i can report back it is a very good saw! Its running a 20" & flys through the wood starts no problem, cold, hot & inbetween. Doesnt really seem very heavy when using either so no complains here!!

[pleasant]

nope,, the standerd one,,

 

 

Classic!

[WoodED]

Classic!

 

thats y i said the 576xp is fantastic works well enough without unessasary electronics

[JimM]

Picked up my 576XP (standard) from Jonesie a couple of weeks ago now and loving it.

For normal fir stuff I just can't fault the 346xp for handling when it comes to snedding quick, but once onto the bigger cherry that I was dealing with, the 576 just chewed it up and spat it out.

Fab saw. Don't find it too heavy and it's a nice shape for throwing around when de-limbing.

Running an 18" bar, with a 24" in reserve.

[Kenny]

Ok, I think this spring will be a little more expensive than I planned:001_huh:

[WoodED]

Ok, I think this spring will be a little more expensive than I planned:001_huh:

 

which 1 u going for?

[[email protected]]

good saw loadsa power although ours has a small problem now and then with the idle speed,sometimes get a wee bit of chain creep,also when cutting rings accross grain (stringy shavings) if you get any shavings at all awround the drive sprocket,it stalls outright,not sure y?

the only saw i own that does this and the only saw with AT.

other than than a good saw,but never as good as a 372xp

[Treegeek]

My 576xp auto tune is the mutts love it to bits i personaly find it a tad heavy but power is well above its size and weight cutts more like a ms660

Must go and wash my mouth out now:lol:

[WoodED]

the last job i used my 576xp on i could bury my bar into anything, 18inch bar, full chizel chain,, low rakers