new idea for your T/W 150

[Big Mark]

Hi everyone, this is my first post and thought I would share an idea I am using to make sure all the chippings go from my chipper into my van with no mess, dust or bits going all over my van. It works like a dream and fills the back up right to the top.

 

I also put some pics of the new back we built on the transit this also works well and only cost €400 for all the metal.

 

Cheers Mark

 

I look forward to your replies.

 

[delabodge]

hi mate welcome,,,nice idea.....my shoots square so wouldnt work,,but like your way of thinking,,,

[skyhuck]

Hi everyone, this is my first post and thought I would share an idea I am using to make sure all the chippings go from my chipper into my van with no mess, dust or bits going all over my van. It works like a dream and fills the back up right to the top.

 

I also put some pics of the new back we built on the transit this also works well and only cost €400 for all the metal.

 

Cheers Mark

 

I look forward to your replies.

 

 

That may work with clean woody stuff, but if you try it with leafy stuff or conifer you will very quickly block the shoot.

[swinny]

what size diameter is that pipe??

 

Cheers

 

Good looking truck and good idea

[Big Mark]

Hi Skyhuck your right about wet stuff but conifer goes through ok so long as its not wet

[Big Mark]

Its 140mm waist pipe and cost a bomb also I had to use the flared end to get it to fit over the shoot I also use a grub screw as it shoots the pipe off if I dont.

[Gareth Dalzell]

I guess there,s may not be as much wet stuff where you are based. I like the chequer plate hopper on the crew cab. Very smart:thumbup1:

[jrose]

I like the anti gravity rakes which stay in place when tipped up

[Riggerbear]

What happens when you over a speed bumb etc or round a tight bend

[Big Mark]

What happens when you over a speed bumb etc or round a tight bend

Ye this is a real big problem, me and the crew are still trying to work out a solution. Do you have any good ideas? LOL