Rope Wrench feedback

[Dak]

Ok so here it is, will be making a new one soon bit more refined... So will post pics then!

 

But until then, i stitched some 8mm op into a loop, i then put the 6mm ov into the thimble..

Then extracted the core from a few inches of each leg leaving the thimble, leaving the core on the thimble and about an inch after exiting the thimble!

 

I then buried the ov cover under the op cover.

 

Once buried i stitched them and shrink wrapped

 

Make sense?

[Dak]

Ok so here it is, will be making a new one soon bit more refined... So will post pics then!

 

But until then, i stitched some 8mm op into a loop, i then put the 6mm ov into the thimble..

Then extracted the core from a few inches of each leg leaving the thimble, leaving the core on the thimble and about an inch after exiting the thimble!

 

I then buried the ov cover under the op cover.

 

Once buried i stitched them and shrink wrapped

 

Make sense?

[Old Mill Tree Care]

Ok so here it is, will be making a new one soon bit more refined... So will post pics then!

 

But until then, i stitched some 8mm op into a loop, i then put the 6mm ov into the thimble..

Then extracted the core from a few inches of each leg leaving the thimble, leaving the core on the thimble and about an inch after exiting the thimble!

 

I then buried the ov cover under the op cover.

 

Once buried i stitched them and shrink wrapped

 

Make sense?

 

Damn you're handy. I don't have the time to do stuff like that so I'll have to make do until I can buy something like yours.

(I spend my spare time replying to your posts😂)

[Old Mill Tree Care]

Ok so here it is, will be making a new one soon bit more refined... So will post pics then!

 

But until then, i stitched some 8mm op into a loop, i then put the 6mm ov into the thimble..

Then extracted the core from a few inches of each leg leaving the thimble, leaving the core on the thimble and about an inch after exiting the thimble!

 

I then buried the ov cover under the op cover.

 

Once buried i stitched them and shrink wrapped

 

Make sense?

 

Damn you're handy. I don't have the time to do stuff like that so I'll have to make do until I can buy something like yours.

(I spend my spare time replying to your posts😂)

[BenR]

That is very tidy tether Dak Nice work

[BenR]

That is very tidy tether Dak Nice work

[Craig Johnson]

Isn't a steel krab ok to cross load?

 

no:001_tt2:

[Craig Johnson]

Isn't a steel krab ok to cross load?

 

no:001_tt2:

[Dak]

Cheers folks

[Dak]

Cheers folks