Jump to content

Log in or register to remove this advert

Rope Wrench feedback


Recommended Posts

any help is much appreciated, so no disrespect taken, been used to the spiderjack its been a bit of a learning curve going back to knots, i weigh between 12.5 and 13 stone, I'm wondering because I'm using a small length cord (65cm) its binding easier, also noticed that I'm burning through the cord pretty quickly too i clip into all sorts haha, trying everything, clipped into the the top of the tether, the bottom and the ring that its all attached too, I'm suing a petal pulley now as i didn't like the way the tether sat next to the hitch climber, ill post a pic of what my set up looks like

Link to comment
Share on other sites

Log in or register to remove this advert

Sounds a combination of too short hitchcord for that cord type your weight ratio and your mind for not liking the way something sits!!

 

Ditch the petzl pulley go back to the hitchclimber, forget what it looks like it does the job an extremely well IMO. Get yourself a 70/75cm length of beeline and try a 3 wrap Knut! Tell me it's not working then and I'll give you my complete setup! Rope hitchcord pulley tether and wrench! An I'll even start using Ddrt with a Prussic for a whole month!!

 

 

Sent from my iPhone using Arbtalk

Link to comment
Share on other sites

I think you need to wash up mate!

 

Quick glance it looks fine mate, if it's a little slippery or won't bite straight away then pull the 2 legs apart so that it dresses the hitch a little tighter! Then fiddle with it and job should be a good n' you ain't gonna see what it's like until you get out the house though really mate ;)

 

 

Sent from my iPhone using Arbtalk

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.