Jump to content

Log in or register to remove this advert

What's on your bench today?


spudulike

Recommended Posts

Log in or register to remove this advert

Been finishing off the 020AVT - one thing I really hate about this design is having to strip half the machine to get to the carb, guess what.................. the carb played up and the metering arm stuck open - got it going well in the end, slight bogging, tweaked the H screw and bingo, spot on now and cutting well.

Link to comment
Share on other sites

Aye that figures, well my name is Cheryl actually:lol:

No I just faff about with saws as a hobby. I only cut a few ton every year to keep warm. Current fleet is my old jonsered 2040 ,20 years old does not want to die, Husqvarna 266 animal of a saw but with suspected air leak and the Dolmar took a punt on it. For really big stuff I borrow my boss man's 576xp:thumbup1:

Link to comment
Share on other sites

Aye that figures, well my name is Cheryl actually:lol:

No I just faff about with saws as a hobby. I only cut a few ton every year to keep warm. Current fleet is my old jonsered 2040 ,20 years old does not want to die, Husqvarna 266 animal of a saw but with suspected air leak and the Dolmar took a punt on it. For really big stuff I borrow my boss man's 576xp:thumbup1:

 

On the 266 - may be worth changing the clutch side seal, itis the typical suspect but depends on how much mechanics you do. If you are tempted to run it, give the H screw 1/4 - 1/2 extra turn out but wouldn't recommend running it until a pressure/vac test has been done on it, especially if it currently has good compression!

 

Any air leak will cause a lean mix and at high revs, the saw will over rev, this causes heat and enough to start melting the piston on the exhaust side and this transfers on to the cylinder and POP, the end of your saw running:thumbdown:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.