What's on your bench today?

[GardenKit]

4 side by side and nose to tail = 16!

[Hedge hunter]

4 side by side and nose to tail = 16!

:001_tt2::001_tt2:

 

 

can ya get I big tractor in?is the door a shutter?

[wisecobandit]

Not had much to do on the chainsaw front.

 

Got a mcculloch California in with a cream crackered coil. New one is £60!! Seems I cant get a s/h one anywhere so if anyone has a mcculloch part saw with a good coil I will happily buy it at a sensible price.

[bobh]

why would you want 4 discos?

 

Only way to keep 1running is to have 3 spares

[Rich2484]

hahha yeah right. i would gie up on the landy if i had to do that.

 

for in a square inside. a nie big set of doors, not rollers but double.

 

yes enough to get a big trator in it.

 

pics when i open up.

[spudulike]

pics when i open up.

 

Yeah Rich but will they be upside down as usual:lol:

 

Bigger workshop.....that would be nice:thumbup:

[Eddy_t]

Not if he uses his iPad upside down

 

 

Sent using Arbtalk Mobile App

[Rich2484]

nope as the ipad has gone. swapped out for a laptop. a lot better for work use.

 

anyway. on the bench is a titan multi tool in need of a primer bulb.

 

other than the usual stuff thats about it.

[spudulike]

Been working on an MS150, it had a 5mm muffler mod so I did a few test cuts in this tune and then opened up the muffler to 8mm and advanced the ignition timing.

 

The mod is worth 7% gains across an average of three cuts, not as much as I was hoping but thats life! Would have been more interesting comparing with a standard saw.

 

Also got a MS362 in for a full porting, this looks like it has a bit left on the table, the exhaust can be significantly widened unlike the MS361. The uppers can be rolled back but almost nothing on the inlet as it is a strato engine and the piston hinders much widening of the port - possibly 0.75mm either side.

 

The lowers can be matched to the gasket and may open up the crankcase to get a bit more flow - a muffler mod should get this saw running with a bit more gusto:thumbup:

 

[ame=http://www.youtube.com/watch?v=k279fFMBmts]Stihl MS150 Muffler Mod 5mm - YouTube[/ame]

[ame=http://www.youtube.com/watch?v=k279fFMBmts]Stihl MS150 Muffler Mod 5mm - YouTube[/ame]

[Eddy_t]

How much did you advance the ignition spud?

 

 

Sent using Arbtalk Mobile App