What's on your bench today?

[lakeyboy]

Put this one down o experience and put your hand in your pocket :lol:

Danm it !!! Anyone point in the direction of one that will work and also not too dear?

[Rich2484]

Halfords. Gunston. £25.

[lakeyboy]

Halfords. Gunston. £25.

 

Lovely job cheers once again I should have consulted the arbtalk gurus beforehand

[ben lightfoot]

exhaust looks like a pain and got to take the handle and orange top cover bit off to get access to the manifold bolts. you ever had to remove the exhaust on you 076 lakeyboy?

[lakeyboy]

exhaust looks like a pain and got to take the handle and orange top cover bit off to get access to the manifold bolts. you ever had to remove the exhaust on you 076 lakeyboy?

I'm still waiting for exhaust for my 76 but it's the same as an 051 take off the air filter undo the two 8mm nuts and one Allen bolt to remove the plate above the carb then you should be able to see two holes in the white plate that covers the cylinder undo the two Allen bolts jobs and that's about it mate

[spudulike]

Gunson Hi gauge works just fine, the one you have wont, you could try swapping the schrader valve in it for a snapon one as I think that is probably the only issue.

[ben lightfoot]

I'm still waiting for exhaust for my 76 but it's the same as an 051 take off the air filter undo the two 8mm nuts and one Allen bolt to remove the plate above the carb then you should be able to see two holes in the white plate that covers the cylinder undo the two Allen bolts jobs and that's about it mate

 

Ah im less bummed out now after your response and a little google says the same thing, will tackle it tomorrow, thanks again guys really useful stuff

[lakeyboy]

Could it be a cheaper alternative spud ? Already bought a dremel, carbide burrs and a comp tester (that is no good) this week

[GardenKit]

Halfords. Gunston. £25.

Hahaha, £19 with a Halfords Trade Card

[Rich2484]

Hahaha, £19 with a Halfords Trade Card

 

Show off :lol::lol:

 

Mines in the post.