post your motorbikes

[WoodED]

my new toy,, this is one of the last ninja 250r's to be sold here as the 300 has replaced it,, it runs like a dream

[geoff]

Getting quite a few bikes on here now,here is my Harley chop, its on the road at last after a winter in the lounge getting built, it needs paint, but I will ride it around a bit before I go stripping it down for that.

It handles lovely even as a hardtail!

 

IMG_1476 by geoff321, on Flickr

 

IMG_1485 by geoff321, on Flickr

[johnanderton]

Yamaha fzr1000 exup 91 plate I've just done up , use to have one first time out , still a fast bike just abit more of a lump compared to new stuff ,

[geoff]

Yamaha fzr1000 exup 91 plate I've just done up , use to have one first time out , still a fast bike just abit more of a lump compared to new stuff ,

 

Nice bike,looks like you have done a good job with it, I had a pre-exup one of these,& yes they are still quick.

[Chris Sheppard]

After weeks of frustration with trying to make the existing aftermarket ignition work and even swapping a complete known to be working ignition the same as what was on for it still not to work, I bit the bullet and ordered a brand new aftermarket ignition from Germany complete with lighting coil too. Fitted it this morning, a couple of girly kicks in me trainers and away it went

 

It's going to need some calming down to be a bit more like an EXC and less like an SX as the powervalve's still like an on/off switch for lifting the front wheel but it's getting there.

 

Was getting a bit worried as am racing next Sunday and had still not had it running since I've had it

 

Getting there - know there's a bit much red going on at the front but the it's just how it happened, it'll do It'll d for now.

[guiton]

[tristree]

http://arbtalk.co.uk/forum/attachment.php?attachmentid=126016&stc=1&d=1370718685

http://arbtalk.co.uk/forum/attachment.php?attachmentid=126017&stc=1&d=1370718685

 

after stripping the brakes down then getting a new battery it ready to ride again my 650 bandit.

[geoff]

After weeks of frustration with trying to make the existing aftermarket ignition work and even swapping a complete known to be working ignition the same as what was on for it still not to work, I bit the bullet and ordered a brand new aftermarket ignition from Germany complete with lighting coil too. Fitted it this morning, a couple of girly kicks in me trainers and away it went

 

It's going to need some calming down to be a bit more like an EXC and less like an SX as the powervalve's still like an on/off switch for lifting the front wheel but it's getting there.

 

Was getting a bit worried as am racing next Sunday and had still not had it running since I've had it

 

Getting there - know there's a bit much red going on at the front but the it's just how it happened, it'll do It'll d for now.

 

That's good news Chris, how you going to calm it down? I know on the old cr500 doubling up on the base gasket took the edge off it a bit when I used it for enduro, or racing on hard packed clay.

[geoff]

Painted some of the tin work on the chop,still more to do, including frame paint, no one likes the colour but me, I find it kind of funky.

 

 

IMG_1579 by geoff321, on Flickr

 

IMG_1583 by geoff321, on Flickr

[Wolfie]

Painted some of the tin work on the chop,still more to do, including frame paint, no one likes the colour but me, I find it kind of funky. /QUOTE]

 

Nice geoff.

Went for a quick ride out with my friend on his new chop yesterday.

My Dukes normally the loudest thing on the street. Couldn't even here it over the noise of his engine.

 

 

 

Sent using Arbtalk Mobile App