Large Timber trailer nearly finished

[mendiplogs]

HI STEVE you must be paying to much for red its 68p lt white 1.43p its its 75p more then red is not good all the best jon have you any more pics of trailer

[gensetsteve]

Its finished and ready for collection a friend is going to collect and run it down when he gets a minute. No more pics yet itching to get my hands on it and have a play

[gensetsteve]

Its finished just need to screw deck boards back down and put grab on. Then need to save for big tractor begging and hiring for the mean time.

[mendiplogs]

HI STEVE looking good mate stephen mate has one like it he had a large mog too tow in mate nice all you need now is the wood all the best jon

[18 stoner]

Looking good Steve, how did you get around the air suspension issue in the end?

[skyhuck]

That looks really good.

 

The only thing I would say is if you do get a mog it would be better on the rockhinger (sp) hitch than a pickup hitch. It would not be a huge job to swan neck the draw bar.

[b101uk]

Look good,

 

Though I am surprised they haven’t put a plate/s between the I-beam rails at the front ware the front mountings for the drawbar pick up on them, in order to stabilise/resist the twist/shear of the I-beam rails e.g. when the trailer is turning sharply with a big tractor on the front.

 

Edited May 15, 2011 by b101uk

[Stephen Blair]

very nice indeed, well done

[mdt]

a very nice smart job, thats the sort of trailer i have in mind but wont look owt like that!!

[gensetsteve]

Look good,

 

Though I am surprised they haven’t put a plate/s between the I-beam rails at the front ware the front mountings for the drawbar pick up on them, in order to stabilise/resist the twist/shear of the I-beam rails e.g. when the trailer is turning sharply with a big tractor on the front.

 

[ATTACH]64825[/ATTACH]

 

I have seen alot of their trailers and to say I have complete faith in their fabrication would be an understatement. I will bear in mind your advice and will look very closely during its early life for cracks etc. I have ringed a couple of places where there was alot of fabrication going on. If all else failed I carry a couple of tubes of no nails and a roll of gaffer tape