Jump to content

Log in or register to remove this advert

Best setting for Hawthorn on Cem moisture meter?


difflock
 Share

Recommended Posts

See pic.

As in Hawthorn/Quickthorn/Whitethorn is not listed in the booklet.

So which other hardwood species would be the best match for Hawthorn.

Which had been lying in a tidy stack exposed to the Sun and wind since last Spring.

I was therefore considering cutting the arm-thick lengths direct into my firewood pile, probably for use the winter after next.

To save double handling.

P.S.

The meter was giving me 15% or lower for the stuff in the shed, when set for Birch or Sitka,  and middle single figures no like 5 or 6% for the exposed to the Sun and wind Ash butt ends yesterday, such has been the cold but bitterly dry and Sunny weather we have got this past 10 days.

I know this figure is not an indicator of actual moisture content, but I suspect it was accurate enough in respect of the surface moisture content.

 

IMG_20230426_141019953.jpg

IMG-20230426-WA0000.jpeg

IMG_20230426_140828563.jpg

Link to comment
Share on other sites

Log in or register to remove this advert

I need to see iffen Plum or Cherry are listed?

Bonus pics of my thorn stack.

Subjectively judging by the weight(or assessed denisty) in the hand, they are pretty dry.

Well except the one in contact with the soil(the rest were kinda up on bearers) 

Cut last spring and left a year in the stack, and trying to grow!

(I shall split it and leave it to dry outside over the summer.)

Ain't nature wonderful!

IMG_20230426_170215905.jpg

IMG_20230426_165125845.jpg

IMG_20230426_170652520.jpg

Edited by difflock
Link to comment
Share on other sites

Well, derp European Cherry is "J" the same as European Bitch, which setting I had used yesterday(cos I was checking Birch anyway) and figured the two woods were each similarly  dense and fine grained to perhaps be a near enough match.

Anyway getting 25 to 35%, only cut a horse's cart load of arm to lower leg  thick stuff for now, while I ponder whether to proceed.  .  .

Since the  heavier stuff is remarkedly straight I might cut it to 1.0m lengths and split it to leave it outside to the end of the summer?

Cheers guys.

Mth

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.