Stein rc2000

[Jacktrades]

Could anyone who owns of these please have look down the bollard tube and tell me how the front two crossed bars interact inside please? 
 

I’m going to have a go at making one and would like to know if they are 4 bits of rod welded on to the bollard tube or if they are threaded through and join each other within the tube for extra strength.

 

(i know the rear rod is all one piece and passes straight through)

 

many thanks

Edited March 14, 2021 by Jacktrades

[MrNick]

Pm Reg Coates i'm sure he'll know🙄

[Doug Tait]

A single rod passes through the bollard with the other two butted against the centre and welded. Sorry but I can't get a very good photo.

 

[htb]

Don't bother, if your going to fabricate something make it a bollard.

[Dan Maynard]

Look at the Treerunner, had mine out again yesterday. Have to admit seems to have gone up in price quite a bit, sure it was under £200.

[Jacktrades]

On 14/03/2021 at 19:08, Doug Tait said:

A single rod passes through the bollard with the other two butted against the centre and welded. Sorry but I can't get a very good photo.

 

Thanks a lot for taking this much appreciated