Jump to content

Log in or register to remove this advert

Kawasaki KHS750B run / cutout issues


flintlockandsteel
 Share

Recommended Posts

When you test the spark, do it in subdued light and pull the engine over hard as sometimes, it isn't easy to see the spark. If no spark, try a new plug before trying a new coil as coils will cost a bit.

If you do get a spark, I would service the OEM carb with new diaphragms, gaskets, gauze strainer and bulb.....I would also replace all fuel lines and filter. It is usually the fuel system that fails on old strimmers as fuel filters get gunked up and fuel lines rot.

Link to comment
Share on other sites

Log in or register to remove this advert

2132154759_Honda2.thumb.jpg.49226fdf210cbf07868afd45f0f38b6e.jpg

On 26/04/2021 at 19:38, spudulike said:

Me too, bugger, Mach 3, all go, mostly vertical on a frame made of wet spaghetti!!

I rode a mates one back in the day ( I had a VFR 750FK with a TTS 837 big bore kit at the time ) and I godda say the Kwacker went great in a strait line but handled like a broken toilet seat compared to my Honda !

Edited by Stubby
  • Like 2
Link to comment
Share on other sites

28 minutes ago, Stubby said:

2132154759_Honda2.thumb.jpg.49226fdf210cbf07868afd45f0f38b6e.jpg

I rode a mates one back in the day ( I had a VFR 750FK with a TTS 837 big bore kit at the time ) and I godda say the Kwacker went great in a trait line but handled like a broken toilet seat compared to my Honda !

Had a do on a KH250 many years ago and back then it was quite quick, the same lad later got and still has it and only rides it when the sun shines and thats a Honda NSR 400 and that is a missisle on wheels, it goes very very well and handles just as good i think its a late 80s bike but will live with todays 600 750s on the B roads, i will stick with my 1954 Triton these days thanks,

  • Like 1
Link to comment
Share on other sites

1 hour ago, spudulike said:

In case some young un doesn't understand.......

Ariel_Square_4_1953_cropped.jpg

 

The above Squariel  appears to have been manufactured the year I was born . The rear cylinders tended to over heat I remember ...Do you remember the advent of " pozzi force " lubrication on Jap 2 strokes ?  The petrol went into one tank and the 2t oil in another . Well Scott were doing that on the Scott Squirrel back in the early 30s . ( 600cc 2 stroke twin )

Edited by Stubby
  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.