Jump to content

Log in or register to remove this advert

Recommended Posts

Posted (edited)

Hi,

 

Last night a storm passed by and a major branch broke of ?

It seems there was already a problem with the branch and I was wondering if this needs any special treatment? Because I don 't want that the upper part of the tree will break off over time

As I recall correcrly, the tree is this one: https://en.wikipedia.org/wiki/Liquidambar_styraciflua

Any help would be very appreciated, because I don't want to lose this tree.

 

gkwsrx3fraj51.jpg?width=2250&format=pjpg

 

Edited by tgoetheyn
  • Like 1

Log in or register to remove this advert

Posted

Looks like a young tree which is lucky- its got age on its side. The tree should be able to cover the wound in time. If i could see the whole tree I would possibly tell you to reduce it a little to relieve wind load.  Trim off the splintered wood and loose bark.

I would mulch around the base of the tree too to keep its vitality as high as possible - dont cover up to the trunk and mulch to a 4 inch depth max.  

  • Like 4
Posted

Hi,

Thanks for the advice!
I cleaned out the wound so it's self draining.


I also read about treating the naked wood with mandarin oil and bees wax to prevent rotting. is this something you can encourage?

I was also wondering if should remove the smaller branch on the edge of the wound.
 

IMG_20200826_085327298.jpg

IMG_20200826_191228749_HDR.jpg

Posted

You could wee on it, the urea will kill bugs and fungi, and resultant ammonia will clean wound..... Ahhhh,  just seen how high it is.... Mr Stubby, would you be so kind ..?  ?  K

  • Haha 2
Posted
4 hours ago, Treewolf said:

If that is the case, would a dose of Adblue work as well? That is supposedly mainly urea.

Its mainly de ionized water only about 28% is urea . 

Posted
9 hours ago, tgoetheyn said:

Hi,

Thanks for the advice!
I cleaned out the wound so it's self draining.


I also read about treating the naked wood with mandarin oil and bees wax to prevent rotting. is this something you can encourage?

I was also wondering if should remove the smaller branch on the edge of the wound.
 

IMG_20200826_085327298.jpg

IMG_20200826_191228749_HDR.jpg

I think I would reduce the height by 1m to reduce the wind load. Do not leave a bare stump when  pruning, just cut above a shoot or branch. No need to do anything else with the wound.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.