Help with no stress EC150

[openspaceman]

3 hours ago, monkeybusiness said:

I don’t know of another machinery manufacturer who offer such amazing technical support as Greenmech - Jase has fixed several issues over the phone for me over the years. Brilliant company made up of brilliant people. 

So should @Jase hutch get his bonus from the advertising budget or just the double time for working his days off??

[monkeybusiness]

1 hour ago, openspaceman said:

So should @Jase hutch get his bonus from the advertising budget or just the double time for working his days off??

Both - he’s a ****************ing legend!

It’s not just him though - they are all like it there. Really helpful across the board. I’ve been to the factory (for a tour and to pick up parts/get flywheels repaired etc) a few times and have only ever met incredibly helpful people!

[GA Groundcare]

17 hours ago, monkeybusiness said:

I don’t know of another machinery manufacturer who offer such amazing technical support as Greenmech - Jase has fixed several issues over the phone for me over the years. Brilliant company made up of brilliant people. 

Agreed. We / I have dealt with many manufactures over the years in the Ag / Groundcare / Arb industry and never met one so helpful as GreenMech. Its a joy to be partnered and a main dealer for them.

[Jase hutch]

[Jase hutch]

Just thought I'd post this to show the maximum engine and flywheel speeds..

Jase.

[Sparkyator]

 Hi, 

Any chance you have photos of the checks you did to fix NS? I have similar on mine & would love it fixed. Mind you, could do with an engine rebuild too and general overhaul!

[Jase hutch]

Hello , 

Sorry but I don't have photos and im unlikely to see an eco in the foreseeable future but I would hope that the checks listed are fairly explanatory without pictures ?

Jase.

[DTG-TREECARE]

Hi Jase.

I have the greenmech 150/25 lister lpa3.

I bought it fire damage and tried to redo all wires myself.

Engine runs and chips but no stress dosnt work I have a green light at full revs but don't know if wires are all connected properly.. and I have no wires for fuel solenoid. I am just wondering if you have or know where I can get the wiring diagram.

Thanks

Edited August 12, 2021 by DTG-TREECARE
Manners

[Nigel Henry]

Hi Richard how old and what model is your GreenMech?  I have one similar out in Portugal and during delivery they lost  the  no stress box.Mine is a chipmaster 200 and like your has a few problems the main one at the moment is they lost the stress box on route which seems to be unavailable and the electric drawing I have might not fit my machine is your No stress box one switch with a red /Green LED Is yours crank sensing or alternator sensing ? I am hoping I can with some pictures of what you have replace the Box. Some pictures would be great. The engine runs really well and it has had new blades clutch and springs + a stress box sensor but now no stress box..... Wondered if you could help? Jase has been really good and forwarded me every thing he has but just need to make a circuit to then trace the other electrical fault which is Roller feed control.  thanks Nigel 

[Jase hutch]

Hi Nigel , 

We do have a No-stress box in stock to fit your chipper., i know because I've been hiding it in my desk as it's the only 'modified' box left..

Jase.

Edited August 17, 2021 by Jase hutch
Spelling mistake