Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Fancied building a power pack for my log splitter to free up the tractor. Didn't fancy shelling out for a Honda engine so took the 2 litre bmw diesel from a Rover 75.

 

Engine cost me £30 all in and I've still got the rover to weigh in. IMG_20200724_170828.jpegIMG_20200724_170816.jpeg

  • Like 13
  • Haha 1

Log in or register to remove this advert

Posted
Magnificent! How did you connect drive to the pump? Any videos of it in action?
I stripped the gearbox other than the input shaft, I then got an adapter made that screws into the back of the input shaft.
Then used a coupler for an electric motor.

I'll get a decent video when I've set the pressure properly IMG_20200723_125006.jpegIMG_20200717_132225.jpegreceived_942604279501447.jpegreceived_193842751687674.jpeg
  • Like 4
Posted

I love this kinda stuff ! . I have a cone splitter with its own engine ( Honda GX 390 ) but its not enough torque .  Was thinking along these lines .

Posted
6 minutes ago, monkeybusiness said:

Does the splitter make the engine work at all or is it just ticking over?

Its fine on easy splitting stuff like Sycamore and soft wood but if you get an ugly lump of knotty Elm it can stall . More torque and it would just chew on .

  • Like 1
Posted
Does the splitter make the engine work at all or is it just ticking over?
I've got it running at 1300 rpm just to get the flow.
Never sounds laboured and I've done 8 hours on it so far and it's not used 5 litres of fuel
  • Like 2
Posted
1 hour ago, Peter 1955 said:

Never mind if it works, I'm just in awe of any machine that has a beer barrel, and an ammunition box! ?

Use what you have to hand great stuff. 

What's the cycle speed like. 

Bulit a power pack last year to run splitter got to give it a good try on my Riko 25t last week even on that it is quicker then tractor. 

Posted
Use what you have to hand great stuff. 
What's the cycle speed like. 
Bulit a power pack last year to run splitter got to give it a good try on my Riko 25t last week even on that it is quicker then tractor. 
It's about 4.5 seconds going down, less going up.
Going to try adjusting the speed to find the sweet spot

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.