Let's see your twin rope system..

[Bing!]

Also had it set up with hitch climber and friction cord.

 

Let's see what you're using.?

[jmac]

Two ropes attached to a single bridge! Very dangerous, you better get a second bridge ????. All joking aside this is prob the best way to have it set up for double rope ?, I used the same setup with hitch climbers when I had to use 2 ropes.

[Bing!]

We've been finding that direct connection to the bridge/bridges results in twisted/crossed over ropes. Single pulley swivel seems to solve that particular problem.

 

The third hole is in preparation for the HSE  3 rope system regulations, due out when someone stubs their toe while being near a tree.....

[jmac]

Yeah the swivel makes it slick.

[All About Trees]

I understand that a twin rope system works well in this configuration and aids spinning around without entanglement etc... but I can't see the additional safety benefit of having 2 climbing systems if they're attached to one bridge. If your bridge is compromised then even 12 climbing systems won't make anything any safer. Don't get it.

[Bing!]

Lol......

Tell this to the HSE.?

[Bing!]

This one makes my head hurt......

Got to think that the system using drenaline would be borderline out of reach when at a stretch??

I believe this is Mutleys set up from Red Stag training.

[Jake Andrews]

This one makes my head hurt......
Got to think that the system using drenaline would be borderline out of reach when at a stretch??
I believe this is Mutleys set up from Red Stag training.

Would that be classed as independently anchored though seeing as its technically one system? I don’t know as the ICOP isn’t clear on what exactly independently anchored means?‍♂️

[Bing!]

I see what you're saying.

Its 2 ropes but 1 system, well,  its 1 attachment point at the bridge.

Ahh, the vagaries of a poorly thought out knee jerk regulation, devised by those that are not versed with the industry they are tasked to "guide"..?.....

[Tommy_B]

If one anchor failed though,specifically the one on the right, would the zig zag on the left be loaded correctly?