Jump to content

Log in or register to remove this advert

Ms500i or still 661?


snltree
 Share

Recommended Posts

  • 2 years later...

Log in or register to remove this advert

3 hours ago, samurayjack said:

Of course the 500i is better.Because it is lighter. This allows you to work longer 

         Stihl MS 500İ      Stihl MS 661
Engine power:                6.7HP             7.2 HP
Engine size:               4.86cc              5.56cc
Weight:              13.9 lbs             16.3 lbs
Price:               $1,400               $1,200

 

 

Are those engine sizes cubic inches ? rather than cc ....Cubic centimeters

Link to comment
Share on other sites

  • 2 weeks later...
Are you going to climb with it? If so I would go 462, or 500i if you feel it's worth the extra money, on 25".

If you're on the ground doing lots of big stems, and/or want something you could mill with, then maybe 661 is right choice. Heavy though.

661 if you need grunt.
Link to comment
Share on other sites

If your looking at price and only need around the 25" mark and wanted a Stihl, I'd get the 661 over the 500i. The 500i is the same price with a 25" bar as the 661 with a 28" so gives you that little bit extra 

Link to comment
Share on other sites

A few months ago I had to decide between 500i and 661, to replace my old 660. I opted for the 661 as this can run the 36 inch bar. I can still manage the 661 from the basket of my MEWP, and for a small number of cuts if I really have to when climbing (462 far preferable though). Not suggesting the 500i is not good for one moment though, but never actually used one.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.