TW125 problems

[Johny Walker]

when they did move they fully rotated once then stoped for about 3/4 seconds then rotated again same with reverse. keeping the button pushed in had no effect. we have battary on charge tonight so hopefully fix it tomorow.

 

is the no strees in box or a tube ,take of & check the wires

[david]

could the flat battery affect the stress control?

 

when i had problems with the stress control sencer on my TW theirs a bit you can check the voltage produced by the sencer. and theres a way to bypass the sencer also. but i cant remember how

 

good luck

[White Noise]

I had similar problems with my 125 TW . I took cover off the stress box near the belts and it was Wet / Damp. I blew it dry with the airline and did the same to the control box on the top of the feed table . There were some rusty connections which I changed . Sealed all boxes after a spray of wd 40 . All was good . Did have a dodgy wire once but thats another story lol .

[Mesterh]

If its the kohler 25hp engine then I would guess at either the feed to the auto feed box is faulty, the little regular thing that is part of the engine is faulty or if your really unlucky the magnets on the engine flywheel have fell to bits and destroyed the stator rotor thingy.

 

If it aint the kohler engine then feel free to totally ignore the above.

 

If you can find the solenoid that controls the flow for the hydraulics then disconnect the wires and see if that works.Then trace it back from there.

[Johny Walker]

will do, but wouldnt that have stoped the rollers alltogether straight away?

 

the wire vibrates making contact hit & miss

[ukminch]

I had a problem on site not so long ago with someone elses chipper. Turned out a new battery fixed it. Try connecting jump lead onto the battery when your running it to confirm whether it's a problem with that.

 

Failing that double check hydraulic filter and electrical connections, try bypassing the stress control and see what happens.

 

Try timberwolf tech if you can't fix it on 01449765820 they should be able to sort you out.

 

R

[testcricket01]

cheers for all the feedback guys really helpful hopefully sort it out tomorow

[Nick B]

You Really need to look at the relay give it a clean up or replace that might work

thats a cheep option if not that try the pump good luck

[dazlog]

I had this problem with mine, the battery was the problem if it is down on charge the rollers will not work, somthing to do with the nostress. Anyway checking and charging the battery worked for me. cheers

[bazbro]

All this tooing and froing... best advice is to take it to a TW dealer to sort it out. It` be sorted now and earning again...